WEBVTT

0:00:03.120000 --> 0:00:08.080000
 Okay, so let's review RSTP functionality
 and start looking into the details

0:00:08.080000 --> 0:00:14.220000
 of how rapid spanning to
 creates a loop-free tree.

0:00:14.220000 --> 0:00:16.700000
 How does it work?

0:00:16.700000 --> 0:00:21.600000
 All right, so the first step is that
 any tree that's created by Span Tree

0:00:21.600000 --> 0:00:24.520000
 has to start with the election
 of a root bridge.

0:00:24.520000 --> 0:00:29.320000
 Only one switch for the tree can be
 elected to this very special role.

0:00:29.320000 --> 0:00:34.760000
 Once the root bridge is elected, all
 of its ports become what's called

0:00:34.760000 --> 0:00:36.560000
 designated ports.

0:00:36.560000 --> 0:00:43.580000
 On all the other switches that were not
 the root bridge, each one of them

0:00:43.580000 --> 0:00:46.920000
 has to elect a root port.

0:00:46.920000 --> 0:00:51.640000
 Then they have to figure out designated
 ports between themselves and then

0:00:51.640000 --> 0:00:53.480000
 we end up blocking non
-designated ports.

0:00:53.480000 --> 0:00:57.800000
 Now there's a lot to that which we're
 going to dig into a little bit here.

0:00:57.800000 --> 0:01:00.860000
 So let's start with the
 root bridge election.

0:01:00.860000 --> 0:01:01.600000
 This is step one.

0:01:01.600000 --> 0:01:03.020000
 This is what has to happen.

0:01:03.020000 --> 0:01:07.380000
 So in Span Tree and all the flavors of
 Span Tree but focusing in on rapid

0:01:07.380000 --> 0:01:11.440000
 spanning tree, a switch will start sending
 out a special Ethernet frame

0:01:11.440000 --> 0:01:16.640000
 which we call a bridge protocol
 data unit, a BPDU.

0:01:16.640000 --> 0:01:20.200000
 This is the fundamental data structure
 that Span Tree uses to discover

0:01:20.200000 --> 0:01:24.440000
 other switches and discover who's going
 to be the root bridge and what

0:01:24.440000 --> 0:01:28.380000
 the status of all the interfaces are going
 to be by transmitting and receiving

0:01:28.380000 --> 0:01:32.020000
 BPDUs. All right.

0:01:32.020000 --> 0:01:37.080000
 So inside that BPDU, every switch is
 going to advertise itself with a

0:01:37.080000 --> 0:01:38.880000
 unique identifier.

0:01:38.880000 --> 0:01:41.020000
 We call it a bridge ID,
 a bridge identifier.

0:01:41.020000 --> 0:01:44.500000
 So every switch comes up with a unique
 bridge ID and the switch with the

0:01:44.500000 --> 0:01:49.660000
 numerically lowest bridge ID ends
 up becoming the root bridge.

0:01:49.660000 --> 0:01:52.280000
 Now what does that bridge
 ID actually composed of?

0:01:52.280000 --> 0:01:57.340000
 It's composed of two pieces of information,
 a bridge priority which is

0:01:57.340000 --> 0:02:07.040000
 a 16-bit field so that can go from
 1 to 61, 440 in increments of 4096

0:02:07.040000 --> 0:02:11.720000
 and a system ID extension.

0:02:11.720000 --> 0:02:17.840000
 That's actually all part of the priority
 field as well as a MAC address.

0:02:17.840000 --> 0:02:23.600000
 Now in the original days, just as a
 quick review here, if this was your

0:02:23.600000 --> 0:02:32.720000
 BPDU and this portion right here was
 your ID, the way it was structured

0:02:32.720000 --> 0:02:39.220000
 was that part of it
 would be your MAC.

0:02:39.220000 --> 0:02:43.860000
 So a switch or a bridge back in those
 days would dynamically determine

0:02:43.860000 --> 0:02:47.400000
 that one of its MAC addresses, usually
 the lowest one it had, would be

0:02:47.400000 --> 0:02:52.020000
 the MAC address of its bridge ID and
 then this portion right here would

0:02:52.020000 --> 0:02:53.740000
 be your priority field.

0:02:53.740000 --> 0:03:00.780000
 Now with what's called extended system
 IDs, if we take our priority field

0:03:00.780000 --> 0:03:06.200000
 and we expand it a little bit, only
 the first four bits of the priority

0:03:06.200000 --> 0:03:09.060000
 field are actually used
 for the priority.

0:03:09.060000 --> 0:03:14.700000
 So if you're modifying the bridge priority
 in a spanning tree command,

0:03:14.700000 --> 0:03:18.020000
 only these four bits are the bits
 that you can actually change.

0:03:18.020000 --> 0:03:23.800000
 The rest of the bits after that are
 what we call, well what the slide

0:03:23.800000 --> 0:03:32.040000
 called, a system dash ID extension
 in reality, that's your VLAN.

0:03:32.040000 --> 0:03:41.600000
 So for example, if this BPDU is reflecting
 the tree for VLAN 7, then all

0:03:41.600000 --> 0:03:46.080000
 these bits here are going to be zeroed
 out except 111 at the end.

0:03:46.080000 --> 0:03:49.360000
 We're going to encode the number 7 in
 there and then these bits will be

0:03:49.360000 --> 0:03:52.940000
 whatever the priority is
 that was configured.

0:03:52.940000 --> 0:03:58.600000
 Now when I give this BPDU to you, you're
 going to interpret this whole

0:03:58.600000 --> 0:04:03.860000
 thing, which is this portion right
 here, as my priority value.

0:04:03.860000 --> 0:04:07.960000
 So let's dig into that
 a little bit more.

0:04:07.960000 --> 0:04:17.820000
 So there it is, two bit, two byte
 priority, six byte MAC address.

0:04:17.820000 --> 0:04:23.280000
 You should also remember what the default
 value is for spanning tree bridge

0:04:23.280000 --> 0:04:31.540000
 priority. That default
 value being 3278.

0:04:31.540000 --> 0:04:33.800000
 So that is the default
 bridge priority.

0:04:33.800000 --> 0:04:40.540000
 So if I'm sending you a BPDU and this
 BPDU represents VLAN 1, you will

0:04:40.540000 --> 0:04:49.440000
 actually see my BPDU is VLAN 1 because
 remember it's 4 bits of priority

0:04:49.440000 --> 0:04:51.660000
 plus a whole bunch
 of bits of VLAN.

0:04:51.660000 --> 0:04:56.860000
 If I'm sending you a BPDU for VLAN
 10, you'll see my priority.

0:04:56.860000 --> 0:05:03.680000
 If I don't change it, if I'm leaving
 the default as 32778, 768 plus VLAN

0:05:03.680000 --> 0:05:09.760000
 10. Now, if you do modify this value
 via configuration, recall like the

0:05:09.760000 --> 0:05:16.140000
 last slide said, this has to be an
 increments or multiples of 4096.

0:05:16.140000 --> 0:05:18.840000
 Now you could knock this
 all the way down to zero.

0:05:18.840000 --> 0:05:21.280000
 Remember, in spanning
 tree, lower is better.

0:05:21.280000 --> 0:05:24.560000
 So you could give yourself
 a bridge priority of zero.

0:05:24.560000 --> 0:05:27.220000
 After that would be 4096.

0:05:27.220000 --> 0:05:31.720000
 After that would be 8192
 and so on and so forth.

0:05:31.720000 --> 0:05:40.780000
 You'll see that 3278 is actually an
 increment or a multiple of 4096.

0:05:40.780000 --> 0:05:45.260000
 All right, real quickly, let's just review
 the port roles and port states

0:05:45.260000 --> 0:05:47.400000
 that rapid spanning tree has.

0:05:47.400000 --> 0:05:54.200000
 So a port role is what is the job or
 purpose of this port as it relates

0:05:54.200000 --> 0:05:59.800000
 to the tree. Is it's is it's job
 to transmit BPDUs into the tree?

0:05:59.800000 --> 0:06:04.100000
 Is it's job to be listening and receiving
 BPDUs from other switches upstream

0:06:04.100000 --> 0:06:06.520000
 in the tree? What's its purpose?

0:06:06.520000 --> 0:06:10.680000
 Is it's job just a block and make
 sure there's no loops here?

0:06:10.680000 --> 0:06:16.400000
 And the port state is what is this
 what is this port's purpose as far

0:06:16.400000 --> 0:06:17.920000
 as data is concerned?

0:06:17.920000 --> 0:06:19.500000
 Is it allowed to forward data?

0:06:19.500000 --> 0:06:20.980000
 Should it block data?

0:06:20.980000 --> 0:06:24.000000
 What should it do as far as your
 actual user data is concerned?

0:06:24.000000 --> 0:06:29.160000
 First one we want to talk about
 is the designated port.

0:06:29.160000 --> 0:06:32.880000
 Now, once the root bridge is elected,
 once again, that was the bridge

0:06:32.880000 --> 0:06:34.580000
 with the lowest bridge ID.

0:06:34.580000 --> 0:06:38.120000
 So all the switches first
 look at their priorities.

0:06:38.120000 --> 0:06:41.300000
 If everybody if somebody has a lower
 priority than everybody else, we're

0:06:41.300000 --> 0:06:43.920000
 done. They win lowest
 priority wins.

0:06:43.920000 --> 0:06:47.860000
 But if you haven't changed that, everybody's
 priority will be the same.

0:06:47.860000 --> 0:06:51.640000
 So then I'll be the switch with the
 lowest MAC address that will win.

0:06:51.640000 --> 0:06:54.460000
 So there will be some winner,
 which is the root bridge.

0:06:54.460000 --> 0:06:58.820000
 Once the root bridge is elected, now
 he will place all of his ports in

0:06:58.820000 --> 0:07:02.000000
 that B land as designated ports.

0:07:02.000000 --> 0:07:05.180000
 And those the designated ports
 are in the forwarding state.

0:07:05.180000 --> 0:07:08.880000
 They are wide open for receiving
 and transmitting traffic.

0:07:08.880000 --> 0:07:15.300000
 Now other switches downstream who did
 not win, who are not the root bridge,

0:07:15.300000 --> 0:07:18.360000
 they have to figure out what interface
 they have that goes back to the

0:07:18.360000 --> 0:07:22.240000
 root bridge that's the fastest
 path back to the root bridge.

0:07:22.240000 --> 0:07:25.120000
 And those here the designated
 ports, what do they do?

0:07:25.120000 --> 0:07:26.800000
 What are they responsible for?

0:07:26.800000 --> 0:07:28.280000
 Transmitting BPDUs.

0:07:28.280000 --> 0:07:32.840000
 A designated port always
 has to transmit a BPDU.

0:07:32.840000 --> 0:07:37.940000
 Now downstream switch, he will
 elect a root port, only one.

0:07:37.940000 --> 0:07:42.620000
 So if I'm a switch, I might be, you know,
 the root bridge might be three,

0:07:42.620000 --> 0:07:47.460000
 four, five hops away from me and I might
 be receiving BPDUs from him on

0:07:47.460000 --> 0:07:49.800000
 like 25 different interfaces.

0:07:49.800000 --> 0:07:53.460000
 I'm going to elect one of those
 interfaces as my root port.

0:07:53.460000 --> 0:07:56.740000
 The root port that will get me back
 to that root bridge, the fastest.

0:07:56.740000 --> 0:07:59.380000
 And we'll talk about in just a moment,
 well, what if there's a tie?

0:07:59.380000 --> 0:08:02.100000
 We'll talk about what
 the tie breakers are.

0:08:02.100000 --> 0:08:05.760000
 But a root port, as you can
 see, is receiving BPDUs.

0:08:05.760000 --> 0:08:09.560000
 I sometimes say root
 port receives, right?

0:08:09.560000 --> 0:08:11.280000
 R-R, root receives.

0:08:11.280000 --> 0:08:13.640000
 So root port receives BPDUs.

0:08:13.640000 --> 0:08:19.880000
 Now, if he has a port that's leading
 further downstream, that will become

0:08:19.880000 --> 0:08:25.440000
 a designated port and he will be forwarding
 those BPDUs on further downstream.

0:08:25.440000 --> 0:08:31.040000
 So bridge C here, on bridge C, his connection
 leading back to bridge B,

0:08:31.040000 --> 0:08:34.540000
 that will be his root port
 that's receiving BPDUs.

0:08:34.540000 --> 0:08:39.540000
 Now, rapid spanning tree also has the
 concept of something called an edge

0:08:39.540000 --> 0:08:44.260000
 port. An edge port is a port that's
 typically leading to a host, like

0:08:44.260000 --> 0:08:49.060000
 a laptop, a PC, a server, even a router,
 something where the broadcast

0:08:49.060000 --> 0:08:51.840000
 domain ends at that host.

0:08:51.840000 --> 0:08:55.100000
 So an edge port is a port where you
 know, as a network administrator,

0:08:55.100000 --> 0:08:59.620000
 that if a broadcast goes out that port,
 it's going to stop on whatever's

0:08:59.620000 --> 0:09:00.500000
 connected to that port.

0:09:00.500000 --> 0:09:04.080000
 There's no way that broadcast is circled
 back around and hit you again

0:09:04.080000 --> 0:09:05.960000
 somewhere else in the network.

0:09:05.960000 --> 0:09:10.780000
 So once you're confident that a port on
 your switch leads to an edge device,

0:09:10.780000 --> 0:09:14.380000
 you can configure it with
 the port fast feature.

0:09:14.380000 --> 0:09:18.920000
 And a port configured with a port fast
 feature is seen by rapid spanning

0:09:18.920000 --> 0:09:21.360000
 tree as an edge port.

0:09:21.360000 --> 0:09:26.360000
 Now, that is also a designated
 port, like we see right here.

0:09:26.360000 --> 0:09:36.800000
 The remaining ports that are not designated
 ports and not root ports become

0:09:36.800000 --> 0:09:41.680000
 blocking. What we used to call blocking
 now in rapid spanning tree, the

0:09:41.680000 --> 0:09:47.180000
 terminology has changed, and we call
 it discarding means exactly the same

0:09:47.180000 --> 0:09:49.660000
 thing. We are discarding
 user data.

0:09:49.660000 --> 0:09:55.780000
 So those will be either alternate
 ports or backup ports.

0:09:55.780000 --> 0:10:00.960000
 So that completes this quick review
 and refresher of the rapid spanning

0:10:00.960000 --> 0:10:04.040000
 tree. In the next video, we're going
 to look at what are some essential

0:10:04.040000 --> 0:10:08.740000
 iOS commands just to get this running
 and maybe deterministically set

0:10:08.740000 --> 0:10:11.380000
 who the root bridge is
 actually going to be.

