WEBVTT

0:00:03.240000 --> 0:00:07.060000
 Hello and welcome to this video, which
 is titled, Utilizing Network Devices

0:00:07.060000 --> 0:00:12.040000
 for DHCP. Now, in previous videos, we
 did a review of exactly what DHCP

0:00:12.040000 --> 0:00:16.580000
 does between a client and a DHCP server,
 how it operates, we did that

0:00:16.580000 --> 0:00:20.080000
 review of Dora, which is the discover,
 the offer, the request, and the

0:00:20.080000 --> 0:00:21.080000
 acknowledgement.

0:00:21.080000 --> 0:00:26.020000
 We talked about the UDP port numbers
 of 67 and 68 use for DHCP.

0:00:26.020000 --> 0:00:30.480000
 Now what we're going to look at is, what
 if, usually in a lab environment,

0:00:30.480000 --> 0:00:33.320000
 but sometimes in a production environment,
 you actually want to configure

0:00:33.320000 --> 0:00:39.440000
 your Cisco iOS device, like your router
 or your switch as a DHCP server.

0:00:39.440000 --> 0:00:43.620000
 Instead of using a legitimate
 Linux or Windows DHCP server.

0:00:43.620000 --> 0:00:46.280000
 You can do that, I'm going to show
 you the basics of how you would do

0:00:46.280000 --> 0:00:51.140000
 that. So here are the steps for configuring
 your router or switch as a

0:00:51.140000 --> 0:00:57.140000
 DHCP server. So step number one is you
 enable that functionality by typing

0:00:57.140000 --> 0:01:01.820000
 service DHCP. Now I've seen in multiple
 lab environments that I don't

0:01:01.820000 --> 0:01:02.920000
 have to do this.

0:01:02.920000 --> 0:01:07.900000
 I think service DHCP is already on
 by default, but doesn't hurt, only

0:01:07.900000 --> 0:01:12.920000
 takes a couple of seconds to type that
 in to ensure that it is operational.

0:01:12.920000 --> 0:01:16.400000
 Then after that, you're going
 to create your DHCP pool.

0:01:16.400000 --> 0:01:21.880000
 Now you're going to create one or more
 DHCP pools, depending on how many

0:01:21.880000 --> 0:01:25.020000
 subnets are going to
 have DHCP clients.

0:01:25.020000 --> 0:01:30.080000
 Clearly, if in my network, I've got 25
 different subnets, one for payroll,

0:01:30.080000 --> 0:01:33.800000
 one for marketing, one for HR, one
 for engineering, and on and on and

0:01:33.800000 --> 0:01:39.100000
 on. I'm going to need a unique DHCP
 pool for each and every one of those

0:01:39.100000 --> 0:01:42.880000
 subnets. So, but here we're just going
 to do one to make it simple.

0:01:42.880000 --> 0:01:45.900000
 And then you give your pool a descriptive
 name, it's completely up to

0:01:45.900000 --> 0:01:49.920000
 you. You might want to name it payroll,
 marketing, engineering, just to

0:01:49.920000 --> 0:01:50.900000
 keep it separate.

0:01:50.900000 --> 0:01:55.960000
 Then once you do that, that puts you
 into config-dacp mode, and now you

0:01:55.960000 --> 0:01:59.080000
 configure the parameters that you're
 going to offer up to your clients

0:01:59.080000 --> 0:02:01.140000
 in your DHCP offers.

0:02:01.140000 --> 0:02:02.900000
 You can configure your network.

0:02:02.900000 --> 0:02:08.840000
 For example, you can say network 10
.10.0, and then you do need to supply

0:02:08.840000 --> 0:02:12.800000
 a subnet mask. This is one of those
 few places where you can actually

0:02:12.800000 --> 0:02:17.860000
 supply the subnet mask in a slash notation
 in addition to data decimals.

0:02:17.860000 --> 0:02:23.740000
 So certainly you could type in 255.255
.255.0, you could do that, or you

0:02:23.740000 --> 0:02:26.480000
 can just simply type in slash 24.

0:02:26.480000 --> 0:02:28.780000
 You could actually do it that
 way to make it easier.

0:02:28.780000 --> 0:02:34.060000
 Then you're going to want to supply
 a default router, like 10.10.10.1,

0:02:34.060000 --> 0:02:37.220000
 or whatever it is that's appropriate
 for this network.

0:02:37.220000 --> 0:02:42.800000
 Probably want to give them a DNS server,
 maybe Google's DNS server.

0:02:42.800000 --> 0:02:44.520000
 And then you want to
 specify the lease.

0:02:44.520000 --> 0:02:48.440000
 And with the lease, you have three
 numbers you could supply.

0:02:48.440000 --> 0:02:54.840000
 If you supply all three numbers, that
 first number is days, second number

0:02:54.840000 --> 0:03:01.960000
 is hours, third number is minutes.


0:03:01.960000 --> 0:03:05.100000
 And so those are now, if you do a question
 mark, there are other options

0:03:05.100000 --> 0:03:07.060000
 you can specify as well.

0:03:07.060000 --> 0:03:10.280000
 But those are probably the minimum parameters
 you want to put into your

0:03:10.280000 --> 0:03:16.900000
 DHCP pool. Now, lastly, in this particular
 network, for example, let's

0:03:16.900000 --> 0:03:22.080000
 say I'm doing the network of the 10
.10 network that I'm allocating.

0:03:22.080000 --> 0:03:27.040000
 Maybe on that particular network segment,
 we actually have a couple of

0:03:27.040000 --> 0:03:31.640000
 servers already there that
 have static IP addresses.

0:03:31.640000 --> 0:03:35.820000
 Maybe one server, maybe server A is
 10.10.10.1, and the other server B

0:03:35.820000 --> 0:03:40.700000
 is 10.10.10.2. And we want to make sure
 we tell this router or the switch

0:03:40.700000 --> 0:03:42.480000
 don't allocate those addresses.

0:03:42.480000 --> 0:03:44.980000
 Those addresses are
 already in use.

0:03:44.980000 --> 0:03:47.320000
 Exclude those from the pool.

0:03:47.320000 --> 0:03:52.160000
 So to do that, we don't actually do
 that exclusion in the pool itself.

0:03:52.160000 --> 0:03:56.980000
 We do that exclusion at the global
 configuration level with an IP DHCP

0:03:56.980000 --> 0:03:59.840000
 excluded dash address command.

0:03:59.840000 --> 0:04:07.920000
 So in this particular case, we would
 say 10.10.10.1, 10.10.10.2, and that

0:04:07.920000 --> 0:04:12.620000
 would exclude those addresses
 from being allocated via DHCP.

0:04:12.620000 --> 0:04:20.640000
 Now, if your DHCP clients are directly
 connected to this DHCP server,

0:04:20.640000 --> 0:04:24.640000
 this router, or switch acting
 as a DHCP server, you're done.

0:04:24.640000 --> 0:04:29.900000
 Because this guy will receive those broadcasts,
 those DHCP discover messages,

0:04:29.900000 --> 0:04:34.760000
 those DHCP request messages
 which come in as broadcast.

0:04:34.760000 --> 0:04:36.640000
 But what if that's not the case?

0:04:36.640000 --> 0:04:41.480000
 Or if we have a situation like this
 where we have, let's say these are

0:04:41.480000 --> 0:04:45.880000
 the clients, these are the laptops
 and PCs, they're probably connected

0:04:45.880000 --> 0:04:53.880000
 to a switch. But what of here we have
 router one, router two, router three,

0:04:53.880000 --> 0:04:58.240000
 and router three is going
 to be our DHCP server.

0:04:58.240000 --> 0:05:03.160000
 Well, we could configure all that stuff
 we just saw on router three, but

0:05:03.160000 --> 0:05:07.260000
 it's not going to do us any good if
 that's all we do, because we know

0:05:07.260000 --> 0:05:11.880000
 that those DHCP messages are going
 to be coming in as broadcasts.

0:05:11.880000 --> 0:05:15.820000
 And once they hit this interface right
 here on router one, router one's

0:05:15.820000 --> 0:05:18.260000
 default behavior is going
 to be to drop those.

0:05:18.260000 --> 0:05:22.700000
 So we have to configure on router one
 specifically on this interface right

0:05:22.700000 --> 0:05:28.820000
 here. We have to configure that as a
 DHCP, what's called a relay agent.

0:05:28.820000 --> 0:05:36.340000
 We have to give him relay agent functionality
 so that when he gets those

0:05:36.340000 --> 0:05:41.120000
 broadcasts, he will encapsulate them
 in a unicast and send it directly

0:05:41.120000 --> 0:05:45.500000
 to our router. And then the next slide,
 I'm going to show you how to do

0:05:45.500000 --> 0:05:50.100000
 that. One other thing, in the lab that
 we have devised for this, if you

0:05:50.100000 --> 0:05:55.860000
 choose to follow the lab, the actual
 DHCP clients are routers or switches.

0:05:55.860000 --> 0:05:57.660000
 We're not going to be using
 an actual client.

0:05:57.660000 --> 0:06:02.360000
 So how do I go onto a router's interface
 and configure that router's interface

0:06:02.360000 --> 0:06:06.200000
 to obtain its address, not statically,
 which is what we would normally

0:06:06.200000 --> 0:06:10.220000
 do, but to obtain its
 address via DHCP?

0:06:10.220000 --> 0:06:12.880000
 Well, this is how
 we would do that.

0:06:12.880000 --> 0:06:17.020000
 We go onto the interface and we
 simply say IP address DHCP.

0:06:17.020000 --> 0:06:23.140000
 So that turns that layer three interface
 into a DHCP client interface.

0:06:23.140000 --> 0:06:26.540000
 And then lastly, how do we go into that
 router one and configure him to

0:06:26.540000 --> 0:06:28.580000
 be a DHCP relay agent?

0:06:28.580000 --> 0:06:33.200000
 Just like this. Go onto the interface
 that's facing the DHCP clients and

0:06:33.200000 --> 0:06:36.980000
 use the IP helper dash
 address command.

0:06:36.980000 --> 0:06:43.880000
 In this particular case, this address
 right here is your DHCP server.

0:06:43.880000 --> 0:06:47.660000
 Wherever that happens to be.

0:06:47.660000 --> 0:06:55.880000
 So now when DHCP broadcasts, like DHCP
 offers, DHCP requests, when they

0:06:55.880000 --> 0:06:59.560000
 come in and are seen on interface gigabit
 zero one, instead of just ignoring

0:06:59.560000 --> 0:07:04.760000
 them and dropping them, he will encapsulate
 them in unicast and unicast

0:07:04.760000 --> 0:07:08.800000
 those packets directly
 to our DHCP server.

0:07:08.800000 --> 0:07:11.900000
 Now, how do we confirm that
 all this is working?

0:07:11.900000 --> 0:07:14.100000
 Well, there's a couple
 of ways we can do it.

0:07:14.100000 --> 0:07:19.980000
 So we can do show IP DHCP binding.


0:07:19.980000 --> 0:07:23.720000
 So on the DHCP server, you can do that
 first command and actually see

0:07:23.720000 --> 0:07:28.620000
 if he has allocated any addresses
 to any DHCP clients.

0:07:28.620000 --> 0:07:32.720000
 And on the client side, so on the router
 that we're using as a DHCP client,

0:07:32.720000 --> 0:07:36.580000
 we can do a debug command
 debug DHCP detail.

0:07:36.580000 --> 0:07:42.160000
 And that will actually show you the
 DHCP transactions in a debug output.

0:07:42.160000 --> 0:07:47.740000
 So that concludes that video on how
 to configure routers and switches

0:07:47.740000 --> 0:07:51.420000
 as DHCP servers, as well
 as DHCP clients.

