WEBVTT

0:00:02.740000 --> 0:00:06.020000
 Hello and welcome this video where I'm
 going to do a review and refresher

0:00:06.020000 --> 0:00:09.700000
 of securing switch ports
 with port security.

0:00:09.700000 --> 0:00:14.360000
 So we're going to talk about an overview
 and configuration of it, security

0:00:14.360000 --> 0:00:17.620000
 violations, and what
 sticky Macs are.

0:00:17.620000 --> 0:00:21.560000
 So recall that the whole idea behind
 port security is that in a normal

0:00:21.560000 --> 0:00:26.700000
 default behavior, the moment you plug
 anything into a switch port, whether

0:00:26.700000 --> 0:00:31.180000
 it be an IP phone, a laptop, a server
 PC, whatever it is, that thing is

0:00:31.180000 --> 0:00:34.900000
 immediately granted access to the network
 because switch ports by default

0:00:34.900000 --> 0:00:39.260000
 are up. They are administratively up and
 so they're just waiting for something

0:00:39.260000 --> 0:00:43.240000
 to connect. So port security allows
 you to add a little bit of security

0:00:43.240000 --> 0:00:48.220000
 restrictions as far as how many things
 are plugged into a port and what

0:00:48.220000 --> 0:00:51.840000
 Mac addresses are allowed
 to be plugged into a port.

0:00:51.840000 --> 0:00:56.180000
 So it's used to limit access to what can
 be connected to your switch ports.

0:00:56.180000 --> 0:01:00.000000
 Now this feature is not available
 on dynamic ports.

0:01:00.000000 --> 0:01:02.540000
 What do I mean by dynamic port?

0:01:02.540000 --> 0:01:08.100000
 Most switch ports by default,
 their mode is dynamic auto.

0:01:08.100000 --> 0:01:11.420000
 Some are dynamic desirable
 but most are dynamic auto.

0:01:11.420000 --> 0:01:14.260000
 So most switch ports
 are not access mode.

0:01:14.260000 --> 0:01:17.100000
 You have to configure that
 as switch port mode access.

0:01:17.100000 --> 0:01:20.520000
 So if you're on a switch port that's
 in the default mode of switch port

0:01:20.520000 --> 0:01:26.280000
 mode dynamic auto or dynamic desirable
 and you try to apply a port security

0:01:26.280000 --> 0:01:29.020000
 command, you will get
 an error message.

0:01:29.020000 --> 0:01:33.240000
 So you have to first convert a port over
 to switch port mode access, then

0:01:33.240000 --> 0:01:36.280000
 you can file that up
 with port security.

0:01:36.280000 --> 0:01:40.240000
 So what can be secured or another way
 of saying this is what can you do

0:01:40.240000 --> 0:01:41.620000
 with port security?

0:01:41.620000 --> 0:01:43.440000
 Well, you have a combination
 of things you can do.

0:01:43.440000 --> 0:01:48.180000
 You can limit the quantity of Mac addresses
 that are learned on a port.

0:01:48.180000 --> 0:01:51.400000
 For example, if you know that a port
 on a switch is leading to somebody's

0:01:51.400000 --> 0:01:54.760000
 cube and in that cube, there
 should only be two devices.

0:01:54.760000 --> 0:02:00.500000
 There should be an IP phone connected
 to the RG45 jack in that cube and

0:02:00.500000 --> 0:02:03.700000
 then behind the IP phone, there
 should be a laptop or a PC.

0:02:03.700000 --> 0:02:07.220000
 So really, there should only be two
 Mac addresses learned on that switch

0:02:07.220000 --> 0:02:10.260000
 port. Well, there's
 no default limit.

0:02:10.260000 --> 0:02:14.120000
 So there's nothing preventing more than
 that being learned on that port.

0:02:14.120000 --> 0:02:18.640000
 But if you switch port port security,
 you can limit it to two Mac addresses.

0:02:18.640000 --> 0:02:22.400000
 If you know what the authorized Mac
 addresses are, if you know, hey, on

0:02:22.400000 --> 0:02:26.260000
 this port, this particular Mac address
 is the only Mac address I should

0:02:26.260000 --> 0:02:30.160000
 ever see. Anything other
 than that is a violation.

0:02:30.160000 --> 0:02:33.500000
 You can configure port security to
 look for that specific Mac address

0:02:33.500000 --> 0:02:36.840000
 and cause a violation if
 it sees anything else.

0:02:36.840000 --> 0:02:39.240000
 Or you can do a combination
 of these two things.

0:02:39.240000 --> 0:02:41.280000
 You can have them work together.

0:02:41.280000 --> 0:02:45.100000
 So here's our basic configuration
 command.

0:02:45.100000 --> 0:02:47.240000
 So you can enable it with
 just that one command.

0:02:47.240000 --> 0:02:49.180000
 Now, here are the questions.

0:02:49.180000 --> 0:02:50.300000
 What are the defaults?

0:02:50.300000 --> 0:02:53.720000
 If I just go on to an access port and
 that's all I configure is switch

0:02:53.720000 --> 0:02:55.000000
 port port dash security.

0:02:55.000000 --> 0:02:57.920000
 You should be aware of
 what will that do?

0:02:57.920000 --> 0:02:59.480000
 Well, the default
 behavior is this.

0:02:59.480000 --> 0:03:03.940000
 Number one, it will allow only
 one Mac address to be learned.

0:03:03.940000 --> 0:03:08.120000
 And whatever the first Mac address is
 that it sees when that port first

0:03:08.120000 --> 0:03:11.980000
 comes up, that will be considered to
 be the one and only authorized Mac

0:03:11.980000 --> 0:03:16.300000
 address. Any other Mac addresses that
 learns after that point will cause

0:03:16.300000 --> 0:03:18.800000
 a security violation.

0:03:18.800000 --> 0:03:22.740000
 Now, what can we do above and beyond
 this one command right here?

0:03:22.740000 --> 0:03:24.700000
 Well, there's some additional
 things we can do.

0:03:24.700000 --> 0:03:29.060000
 For example, we could use the switch port
 port dash security maximum command

0:03:29.060000 --> 0:03:32.300000
 to give us more than one address.

0:03:32.300000 --> 0:03:35.880000
 So if we know this port like I in my
 previous description, if I know this

0:03:35.880000 --> 0:03:39.060000
 port is ultimately going to learn two
 Mac addresses, an IP phone and a

0:03:39.060000 --> 0:03:42.900000
 laptop, we might want to use this command
 right here to increase the maximum

0:03:42.900000 --> 0:03:46.820000
 to two instead of just
 the default of one.

0:03:46.820000 --> 0:03:52.400000
 If we know that this port is connected
 to a device with a static IP address

0:03:52.400000 --> 0:03:56.580000
 like a server or router or something
 that never changes and never moves

0:03:56.580000 --> 0:04:01.800000
 and we know what the Mac address is
 of that authorized device, well, we

0:04:01.800000 --> 0:04:06.280000
 can use the switch port port dash security
 Mac command and then pre type

0:04:06.280000 --> 0:04:10.500000
 in the Mac address of
 that known device.

0:04:10.500000 --> 0:04:14.220000
 We can apply an aging timer
 to authorize Mac addresses.

0:04:14.220000 --> 0:04:19.560000
 You see, once you plug in your,
 for example, let's do this.

0:04:19.560000 --> 0:04:20.980000
 Here's an example.

0:04:20.980000 --> 0:04:22.380000
 Let's say I had this.

0:04:22.380000 --> 0:04:32.860000
 Let's say here I had switch one switch
 two and I decided that both ends

0:04:32.860000 --> 0:04:37.920000
 of this link are going to be
 configured as access ports.

0:04:37.920000 --> 0:04:42.100000
 Switch port mode access.

0:04:42.100000 --> 0:04:46.560000
 Now port security is normally meant
 to be done on your edge ports.

0:04:46.560000 --> 0:04:50.400000
 Your ports actually connecting to hosts,
 but there could be a scenario

0:04:50.400000 --> 0:04:55.500000
 where you want to actually configure
 port security right here on this

0:04:55.500000 --> 0:04:58.500000
 port. After all, it
 is an access port.

0:04:58.500000 --> 0:05:03.580000
 So it is a candidate for securing
 port security on it.

0:05:03.580000 --> 0:05:10.760000
 Now, if you did it right there and then
 let's say this PC here with the

0:05:10.760000 --> 0:05:16.220000
 Mac address of AA connected to switch
 one and he sends a DHCP frame or

0:05:16.220000 --> 0:05:24.020000
 whatever it is. So now we learn AA on
 this port port security has learned

0:05:24.020000 --> 0:05:29.660000
 it. Now, let's say that
 this guy goes away.

0:05:29.660000 --> 0:05:31.820000
 He disconnects from switch one.

0:05:31.820000 --> 0:05:35.740000
 Well, switch one is aware of that because
 the port he was connected to

0:05:35.740000 --> 0:05:37.840000
 just went down. He
 pulled out of it.

0:05:37.840000 --> 0:05:39.420000
 Switch two is not aware of it.

0:05:39.420000 --> 0:05:42.440000
 Switch two's port that has port security
 on it is still up and functional

0:05:42.440000 --> 0:05:46.940000
 and it will continue to have AA
 learn in its Mac address table.

0:05:46.940000 --> 0:05:51.760000
 You see Mac addresses learned by port
 security are not subject to the

0:05:51.760000 --> 0:05:56.640000
 normal aging time of regular dynamic
 Mac addresses, which is five minutes,

0:05:56.640000 --> 0:06:00.160000
 300 seconds. When a Mac address is learned
 by port security, it's static.

0:06:00.160000 --> 0:06:03.960000
 It stays in the Mac address table
 as long as that interface is up.

0:06:03.960000 --> 0:06:07.580000
 So this might be a good situation where
 you say, hey, you know, on switch

0:06:07.580000 --> 0:06:12.280000
 two, if a Mac addresses learn via port
 security, I do want to apply an

0:06:12.280000 --> 0:06:13.440000
 aging timer to it.

0:06:13.440000 --> 0:06:15.580000
 I don't want to stay
 in there forever.

0:06:15.580000 --> 0:06:19.380000
 So if that's what you want to do, you
 can see right here, the command

0:06:19.380000 --> 0:06:22.040000
 is switch port port dash
 security, aging time.

0:06:22.040000 --> 0:06:26.020000
 And you can apply an aging time to those
 types of statically learned Mac

0:06:26.020000 --> 0:06:33.980000
 addresses. We can also have an aging
 type of absolute or inactivity.

0:06:33.980000 --> 0:06:39.260000
 So we could say, all right, let's say
 I do an aging time of 10 minutes

0:06:39.260000 --> 0:06:43.560000
 with the first command, then I could say,
 okay, what I want that 10 minutes

0:06:43.560000 --> 0:06:47.360000
 to apply to, I could say absolute,
 which means, hey, after 10 minutes

0:06:47.360000 --> 0:06:51.940000
 is over, even if that guy has been talking
 the whole time, I've seen frames

0:06:51.940000 --> 0:06:54.240000
 from that Mac address,
 it doesn't matter.

0:06:54.240000 --> 0:06:56.380000
 I'm going to age it out and
 I'm going to relearn it.

0:06:56.380000 --> 0:07:00.260000
 The next time I see that Mac address
 again, that would be absolute.

0:07:00.260000 --> 0:07:04.820000
 Or we could say inactivity, which means,
 hey, from the moment I stop seeing

0:07:04.820000 --> 0:07:09.760000
 frames from that Mac address, I will
 wait 10 minutes or whatever it is

0:07:09.760000 --> 0:07:13.140000
 I configured. And then
 I will age it out.

0:07:13.140000 --> 0:07:15.340000
 Those are the differences there.

0:07:15.340000 --> 0:07:19.660000
 What about violations?

0:07:19.660000 --> 0:07:26.020000
 Well, the default violation is it says
 shutdown because in the command

0:07:26.020000 --> 0:07:30.940000
 when you're configuring the port security
 mode, the violation mode, one

0:07:30.940000 --> 0:07:33.820000
 of the violation modes
 has the word shutdown.

0:07:33.820000 --> 0:07:38.720000
 In reality, if this violation occurs,
 it's not really going to shut down

0:07:38.720000 --> 0:07:44.020000
 the port instead is going to put
 the port into air disabled state.

0:07:44.020000 --> 0:07:46.000000
 Now, what's the difference?

0:07:46.000000 --> 0:07:51.020000
 If you're like me, when I hear the term,
 oh, a port is shut down, I think

0:07:51.020000 --> 0:07:53.440000
 administratively disabled.

0:07:53.440000 --> 0:07:56.520000
 I think that someone has issued the
 shutdown command and that port is

0:07:56.520000 --> 0:07:58.140000
 electrically inactive.

0:07:58.140000 --> 0:08:00.240000
 It's dead. It might as
 well not even be there.

0:08:00.240000 --> 0:08:02.020000
 That's what I think when
 I think shut down.

0:08:02.020000 --> 0:08:06.520000
 When a port goes into the air disabled
 state, it's not like a shutdown.

0:08:06.520000 --> 0:08:09.560000
 It's not like it's administratively disabled
 and all the way down at layer

0:08:09.560000 --> 0:08:14.360000
 one. Now, if a port does go into the
 air disabled state, for all intents

0:08:14.360000 --> 0:08:18.720000
 and purposes, it's going to be shut
 down because nothing can go in or

0:08:18.720000 --> 0:08:21.220000
 out of that port at that point.

0:08:21.220000 --> 0:08:25.260000
 Just know that the actual thing it will
 do if it's triggered to go into

0:08:25.260000 --> 0:08:29.960000
 the shutdown state is it will air disable
 the port, which means you would

0:08:29.960000 --> 0:08:35.980000
 have to go onto that interface in the
 command line and type shutdown no

0:08:35.980000 --> 0:08:38.460000
 shutdown to bring it back
 out of that state.

0:08:38.460000 --> 0:08:41.120000
 Now, there are some other
 states you can do.

0:08:41.120000 --> 0:08:47.260000
 For example, let's say that what you
 want to have happen, for example,

0:08:47.260000 --> 0:09:01.180000
 let's say that we said switch port,
 port dash security, maximum five.

0:09:01.180000 --> 0:09:04.300000
 So I do that on my interface.

0:09:04.300000 --> 0:09:11.180000
 Config dash IF. So my objective is
 it's okay if this interface learns

0:09:11.180000 --> 0:09:13.100000
 up to five MAC addresses.

0:09:13.100000 --> 0:09:14.920000
 Nothing beyond that though.

0:09:14.920000 --> 0:09:17.220000
 Okay, it learns five
 MAC addresses.

0:09:17.220000 --> 0:09:20.800000
 It's fine and all of a sudden
 a sixth MAC address comes in.

0:09:20.800000 --> 0:09:25.080000
 In the default violation mode, everybody
 is going to suffer because in

0:09:25.080000 --> 0:09:28.160000
 the default violation mode that six MAC
 address will cause that interface

0:09:28.160000 --> 0:09:30.160000
 to go into the air disabled state.


0:09:30.160000 --> 0:09:34.000000
 So not only does that person pay the
 price, my first five MAC addresses

0:09:34.000000 --> 0:09:38.080000
 which were legitimately using that port,
 they also pay the price because

0:09:38.080000 --> 0:09:39.840000
 the port went air disabled.

0:09:39.840000 --> 0:09:42.560000
 So you might want to say, hey, you know
 what, I don't want that to happen.

0:09:42.560000 --> 0:09:43.700000
 Here's what I want.

0:09:43.700000 --> 0:09:47.800000
 Whatever the offending frame is that
 causes the violation, I want that

0:09:47.800000 --> 0:09:52.500000
 offending frame dropped, but I don't want
 to penalize my other MAC addresses

0:09:52.500000 --> 0:09:55.540000
 which are legitimate, which we're
 learned which are okay.

0:09:55.540000 --> 0:09:58.800000
 So I don't want to have a violation
 mode of shutdown in that case.

0:09:58.800000 --> 0:10:02.680000
 In that case, I want to switch my violation
 mode to either protect or

0:10:02.680000 --> 0:10:06.380000
 restrict. What's the difference
 between those two?

0:10:06.380000 --> 0:10:09.520000
 Well, both of them, their
 action is the same.

0:10:09.520000 --> 0:10:13.100000
 If I have a violation of mode of protect
 or restrict, when an offending

0:10:13.100000 --> 0:10:16.320000
 frame comes in, a frame that would
 trigger violation, we're just going

0:10:16.320000 --> 0:10:18.720000
 to drop it. We're going
 to discard that frame.

0:10:18.720000 --> 0:10:20.140000
 Here's the difference.

0:10:20.140000 --> 0:10:24.120000
 With protect, there's no
 record of that drop.

0:10:24.120000 --> 0:10:28.480000
 There's no syslog messages that indicate
 that anything caused a violation.

0:10:28.480000 --> 0:10:31.960000
 There's no counters that are increased
 to show you how many violations

0:10:31.960000 --> 0:10:34.020000
 have occurred over time.

0:10:34.020000 --> 0:10:38.680000
 All that happens with protect is that
 the violating frame gets discarded.

0:10:38.680000 --> 0:10:42.140000
 That's it. Which might be fine
 for what you need to do.

0:10:42.140000 --> 0:10:45.020000
 If you want a little bit more visibility,
 though, you probably want to

0:10:45.020000 --> 0:10:46.860000
 set it to restrict.

0:10:46.860000 --> 0:10:52.540000
 Restrict will show you a syslog message
 when a violation occurs and it

0:10:52.540000 --> 0:10:55.880000
 will increase the violation counters
 in some of the commands we're going

0:10:55.880000 --> 0:11:00.760000
 to see in just a moment, your show
 commands, report security.

0:11:00.760000 --> 0:11:04.560000
 We also see on the bottom of the slide
 here that switch port port security

0:11:04.560000 --> 0:11:09.080000
 MAC address command, which allows us
 to statically configure a well-known

0:11:09.080000 --> 0:11:10.740000
 MAC address in advance.

0:11:10.740000 --> 0:11:14.340000
 Now, let's paint out
 a different scenario.

0:11:14.340000 --> 0:11:16.420000
 We're going to talk
 about sticky Macs.

0:11:16.420000 --> 0:11:22.360000
 Let's say that I'm designing a network,
 I'm putting a new switch into

0:11:22.360000 --> 0:11:28.000000
 place. And on this new switch, let's
 say 25 of the interfaces, I'm going

0:11:28.000000 --> 0:11:31.040000
 to cable the system up to devices
 with static IP addresses.

0:11:31.040000 --> 0:11:33.600000
 Some of those interfaces are going
 to go to a couple routers.

0:11:33.600000 --> 0:11:36.140000
 Some of those interfaces are
 going to go to servers.

0:11:36.140000 --> 0:11:41.540000
 And so what I want to do is I want to
 have the default of one MAC address.

0:11:41.540000 --> 0:11:48.080000
 It's perfectly fine for me
 to do interface range.

0:11:48.080000 --> 0:11:52.460000
 How about gig zero slash
 one through 40.

0:11:52.460000 --> 0:11:57.480000
 And I'm going to say switch
 port mode access.

0:11:57.480000 --> 0:12:00.480000
 Turn them all into access ports.

0:12:00.480000 --> 0:12:05.140000
 And switch port port
 dash security.

0:12:05.140000 --> 0:12:10.940000
 Okay, so remember the default now is
 that only one MAC address is going

0:12:10.940000 --> 0:12:14.500000
 to be allowed, which is okay, because all
 40 of these ports are only connected

0:12:14.500000 --> 0:12:18.200000
 to one host, a bunch of servers
 or maybe a couple of routers.

0:12:18.200000 --> 0:12:21.220000
 And the default is if there's a violation,
 we're going to air disable

0:12:21.220000 --> 0:12:24.620000
 the port. I might want
 to change that.

0:12:24.620000 --> 0:12:30.200000
 Maybe I want to say switch
 port port dash security.

0:12:30.200000 --> 0:12:40.200000
 Violation. How about restrict so I can
 see a record of when a violation

0:12:40.200000 --> 0:12:43.960000
 occurs. Now here's the next
 thing I say, you know what?

0:12:43.960000 --> 0:12:51.880000
 I don't really know what the MAC address
 is of these, you know, 38 servers

0:12:51.880000 --> 0:12:53.820000
 on these two routers.

0:12:53.820000 --> 0:12:57.800000
 If I did know what that MAC address
 was, I would love to add that to my

0:12:57.800000 --> 0:13:01.860000
 configuration. Therefore, no other MAC
 address would ever be authorized.

0:13:01.860000 --> 0:13:04.900000
 But that I don't want somebody because
 here's the default behavior.

0:13:04.900000 --> 0:13:08.240000
 The default behavior is maybe one of those
 ports is connected to a legitimate

0:13:08.240000 --> 0:13:13.520000
 server. Somebody can just come around,
 disconnect that server that disconnect

0:13:13.520000 --> 0:13:15.440000
 the ethernet cable
 from that server.

0:13:15.440000 --> 0:13:19.180000
 Port goes down. So whatever the MAC address
 was of the server gets deleted

0:13:19.180000 --> 0:13:19.900000
 from the switch.

0:13:19.900000 --> 0:13:23.740000
 And now they can take that ethernet cable,
 stick it into their own server

0:13:23.740000 --> 0:13:25.240000
 or stick it into their own laptop.


0:13:25.240000 --> 0:13:26.440000
 And guess what's going to happen?

0:13:26.440000 --> 0:13:30.920000
 Now the port's going to come up and that
 rogue unauthorized device, whatever

0:13:30.920000 --> 0:13:35.340000
 his MAC address is, that's the first
 MAC address that's learned that's

0:13:35.340000 --> 0:13:36.760000
 considered authorized.

0:13:36.760000 --> 0:13:37.760000
 I don't want that.

0:13:37.760000 --> 0:13:41.800000
 Whether this port goes down or up, down
 or up, I only want the known authorized

0:13:41.800000 --> 0:13:44.260000
 MAC address to be the
 one that's allowed.

0:13:44.260000 --> 0:13:48.260000
 Well, how do I do that if I don't know
 what those 40 MAC addresses are?

0:13:48.260000 --> 0:13:51.780000
 I can use this command
 right here that we see.

0:13:51.780000 --> 0:13:55.820000
 I can say, well, that's actually
 not the command.

0:13:55.820000 --> 0:13:57.900000
 I can do the command right here.

0:13:57.900000 --> 0:14:02.300000
 Switch port, port dash security,
 MAC address, sticky.

0:14:02.300000 --> 0:14:07.980000
 Let's just go ahead and
 read some of that.

0:14:07.980000 --> 0:14:12.220000
 Switch port, port security,
 MAC address, sticky.

0:14:12.220000 --> 0:14:16.060000
 And so what that does is the moment
 the interface comes up.

0:14:16.060000 --> 0:14:18.420000
 So let's just assume that right
 now everything's good.

0:14:18.420000 --> 0:14:24.220000
 All 40 of these interfaces are connected
 to my well-known authorized devices.

0:14:24.220000 --> 0:14:28.560000
 So after doing interface range,
 I do a shut, no shut.

0:14:28.560000 --> 0:14:32.580000
 Now what happens is as those interfaces
 come up, those devices are going

0:14:32.580000 --> 0:14:33.520000
 to start sending stuff.

0:14:33.520000 --> 0:14:39.440000
 You know, ARPS, DHCP, the routers might
 send CDP frames, whatever it is

0:14:39.440000 --> 0:14:42.600000
 they send. They're going to start sending
 stuff and their MAC addresses

0:14:42.600000 --> 0:14:45.220000
 are going to be learned
 on the switch.

0:14:45.220000 --> 0:14:49.100000
 But even better than that, once those
 MAC addresses are learned, they're

0:14:49.100000 --> 0:14:55.040000
 actually going to show up in the
 running config of my switch.

0:14:55.040000 --> 0:15:00.880000
 As if I had configured the MAC
 addresses myself manually.

0:15:00.880000 --> 0:15:05.600000
 And now, so this one is probably just
 easier to demonstrate than to talk

0:15:05.600000 --> 0:15:14.120000
 about. So for example, if we
 look at our topology diagram.

0:15:14.120000 --> 0:15:17.840000
 We got to hear for a second.

0:15:17.840000 --> 0:15:26.740000
 Go back to our topology
 diagram, which is this.

0:15:26.740000 --> 0:15:31.960000
 Okay, so let's take a
 look at switch three.

0:15:31.960000 --> 0:15:41.700000
 And his. Gig zero slash one is connected
 to gig zero slash one on router

0:15:41.700000 --> 0:15:46.620000
 three. Now it's also connected to this
 guy right here, but for all intents

0:15:46.620000 --> 0:15:49.480000
 and purposes, let's, let's forget
 about him for a moment.

0:15:49.480000 --> 0:15:50.940000
 So here's what I'm going to do.

0:15:50.940000 --> 0:15:53.940000
 I'm going to configure port security
 on gig zero slash one.

0:15:53.940000 --> 0:15:55.780000
 Let's just go ahead and do that.

0:15:55.780000 --> 0:15:58.600000
 I'll switch three.

0:15:58.600000 --> 0:16:08.620000
 Your face gig zero slash one.

0:16:08.620000 --> 0:16:10.400000
 Let's shut it down first.

0:16:10.400000 --> 0:16:15.940000
 Switch port mode access.

0:16:15.940000 --> 0:16:18.400000
 Switch port access.

0:16:18.400000 --> 0:16:22.660000
 Nope, not switch port access switch
 port port dash security.

0:16:22.660000 --> 0:16:25.460000
 The default will be one.

0:16:25.460000 --> 0:16:28.000000
 That's fine. Let's go
 ahead and raise that.

0:16:28.000000 --> 0:16:31.100000
 Because there actually is there are
 two things on there, the Ubuntu host

0:16:31.100000 --> 0:16:32.120000
 and that router.

0:16:32.120000 --> 0:16:36.660000
 So switch port port dash
 security maximum.

0:16:36.660000 --> 0:16:39.980000
 Let's just raise that to two.

0:16:39.980000 --> 0:16:46.120000
 Okay, do show run interface
 gig zero slash one.

0:16:46.120000 --> 0:16:48.840000
 Okay, so we can see right now.

0:16:48.840000 --> 0:16:50.720000
 The interface is shut down.

0:16:50.720000 --> 0:16:52.900000
 It's configured for port security.


0:16:52.900000 --> 0:16:55.740000
 I've raised it to a maximum
 of two addresses.

0:16:55.740000 --> 0:16:58.800000
 That's the only port security
 thing I have on there.

0:16:58.800000 --> 0:17:01.500000
 Now I do a no shut.

0:17:01.500000 --> 0:17:09.820000
 All right, so. Let's go
 to router three here.

0:17:09.820000 --> 0:17:12.520000
 And just to make sure he's
 sending something.

0:17:12.520000 --> 0:17:16.100000
 Let's do cdp timer.

0:17:16.100000 --> 0:17:25.900000
 Of five. Okay, let's go
 back on a switch three.

0:17:25.900000 --> 0:17:34.580000
 Show Mac address dash table
 interface gig zero one.

0:17:34.580000 --> 0:17:36.500000
 Okay, so we have learned
 a Mac address.

0:17:36.500000 --> 0:17:39.160000
 I'm not sure if that's the Ubuntu device
 or if that's the router, but

0:17:39.160000 --> 0:17:40.980000
 we've learned something
 on that interface.

0:17:40.980000 --> 0:17:42.500000
 And notice it says static.

0:17:42.500000 --> 0:17:43.640000
 I didn't type that in.

0:17:43.640000 --> 0:17:44.840000
 I didn't type that in myself.

0:17:44.840000 --> 0:17:46.460000
 It's just there.

0:17:46.460000 --> 0:17:52.440000
 Now show run interface gig zero slash
 one shows no mention of that Mac

0:17:52.440000 --> 0:17:54.420000
 address, right? It's not there.

0:17:54.420000 --> 0:17:59.180000
 So if I shut down that port and then
 re enabled it, whatever the next

0:17:59.180000 --> 0:18:02.640000
 Mac address is, the very first one
 to be learned, that would take its

0:18:02.640000 --> 0:18:04.680000
 place. I don't want that.

0:18:04.680000 --> 0:18:06.740000
 I say this is my authorized
 Mac address.

0:18:06.740000 --> 0:18:09.020000
 Now let's say I didn't
 know that in advance.

0:18:09.020000 --> 0:18:10.520000
 Here's what I could do.

0:18:10.520000 --> 0:18:13.120000
 Interface gig zero slash one.

0:18:13.120000 --> 0:18:20.440000
 Shut it down. Then we
 could say switch port.

0:18:20.440000 --> 0:18:23.340000
 Ort dash security Mac.

0:18:23.340000 --> 0:18:27.700000
 And instead of typing in the Mac, it's
 drastically I could stay sticky.

0:18:27.700000 --> 0:18:29.360000
 I could say that.

0:18:29.360000 --> 0:18:38.000000
 No shut. Show run interface
 gig zero one.

0:18:38.000000 --> 0:18:42.940000
 And see that? That command was just
 dynamically placed in there.

0:18:42.940000 --> 0:18:46.720000
 It took the Mac address it learned,
 put it right into the config.

0:18:46.720000 --> 0:18:49.320000
 And now I can save my config.

0:18:49.320000 --> 0:18:54.060000
 And now no matter how often this interface
 bounces up and down, no matter

0:18:54.060000 --> 0:18:58.780000
 how often this switch crashes and reloads,
 this will always be part of

0:18:58.780000 --> 0:19:05.560000
 my config. So right now, this is a sort
 of pre reserved, well known authorized

0:19:05.560000 --> 0:19:10.080000
 Mac address. Now because I did a maximum
 of two, it has the ability to

0:19:10.080000 --> 0:19:13.900000
 learn one more and also put
 that as part of the config.

0:19:13.900000 --> 0:19:18.600000
 So that is what sticky Mac
 addresses are all about.

0:19:18.600000 --> 0:19:26.000000
 And that concludes this video refresher
 of the port security feature and

0:19:26.000000 --> 0:19:27.300000
 how you configure it.

