{
    "id": "0fe87763-43ac-4e24-b284-72b4e2c57580",
    "name": "IPv4 Addressing & Cisco IOS CLI Essentials",
    "slug": "ipv4-addressing-cisco-ios-cli-essentials",
    "status": "published",
    "lab_type": "pta",
    "is_sample": false,
    "duration_in_seconds": 1800,
    "metadata": {
        "courses": [
            "84511766-3c0b-48c4-bba4-4cca692382bf"
        ],
        "pta_sdn": "242",
        "pta_namespace": "my.ine",
        "learning_paths": [],
        "has_published_parent": true
    },
    "session": null,
    "company": "a491bc32-c056-4946-9169-cc053387bada",
    "created": "2022-07-07T13:20:11.932198Z",
    "modified": "2023-10-03T18:58:27.089020Z",
    "is_beta": false,
    "lab_objectives": [],
    "main_learning_area": "e73fd5a8-2ead-4159-9a25-38b50ad4ab20",
    "learning_areas": [
        {
            "id": "e73fd5a8-2ead-4159-9a25-38b50ad4ab20",
            "name": "Networking",
            "slug": "networking"
        }
    ],
    "categories": [],
    "tags": [],
    "difficulty": null,
    "is_web_access": false,
    "is_lab_experience": false,
    "is_featured": false,
    "cve": null,
    "severity": null,
    "year": null,
    "external_url": "",
    "solution_video": null,
    "explanation_video": null,
    "description": "![description](https://assets.ine.com/content/ptp/Keith/VOD-5333/Lab-3914/diagram.png)\n\n\n***NOTE:*** Please read the following lab guidelines before working on this lab.\n- If any device contains preconfigured login credentials use, **cisco/cisco**\n- If you plan working on more than one Lab Task during the day (all related to the same course), open the first lab environment and keep it open for subsequent labs (unless instructed otherwise) to save yourself excessive bootup time. Simply read the Lab Objectives from subsequent labs and perform them on your first, opened lab environment.",
    "description_html": "<p><img alt=\"description\" src=\"https://assets.ine.com/content/ptp/Keith/VOD-5333/Lab-3914/diagram.png\" /></p>\n<p><strong><em>NOTE:</em></strong> Please read the following lab guidelines before working on this lab.\n- If any device contains preconfigured login credentials use, <strong>cisco/cisco</strong>\n- If you plan working on more than one Lab Task during the day (all related to the same course), open the first lab environment and keep it open for subsequent labs (unless instructed otherwise) to save yourself excessive bootup time. Simply read the Lab Objectives from subsequent labs and perform them on your first, opened lab environment.</p>",
    "tasks": "**Task-1: Initial IPv4 Addressing Design**\n\nIn this section you will use the VLSM method to design an IPv4 addressing scheme for two routers in your topology.\n\n\n1. Given the starting network shown above the chart (see below), you must use VLSM to divide the network into multiple subnets.\n2. Subnet zero should be used as your first subnet.\n3. Each subnet should consume as MANY networking bits as possible\n4. ***Router interfaces will be assigned the first available host address in each subnet*** (with the exception of Gi0/0 on routers \u201cR1\u201d and \u201cR2\u201d which will consume all addresses within its network).\n5. Router Loopback interfaces must be created prior to addressing\n6. One network has already been completed for you.\n\n\n***Starting Network: 100.1.1.0/24***\n\n|Network|# of Hosts|Subnet-ID|Subnet Mask|Router Interface Address|\n|---|---|---|---|---|\n|A| 35|  | |R1(Lo0): |\n|B| 14|  | |R1(Lo1): |\n|C| 2|  | |R1(Lo2): |\n|D| 11|  | |R1(Lo3): |\n|E| 57|  | |R2(Lo0): |\n|F| 27|  | |R2(Lo1): |\n|G| 29|  | |R2(Lo2): |\n|H| 12| | |R2(Lo3): |\n|I| 2|100.1.1.252  |255.255.255.252 |R1(G0/0): .253  R2(G0/0): .254 |\n|J| 6|  | |R2(Lo4): |\n\n\n**Task-2: Initial Router Configuration**\n\n1. At present, when you login to routers R1 or R2 they simply display the name of \"Router\". Change this so that R1 and R2 display unique names.\n\n2. Implement a command so that if you mistype any commands in the future, Cisco IOS will not attempt a DNS resolution of your mistyped command.\n\n3. Implement a command so that if Cisco IOS spontaneously displays some logging or SYSLOG output to the screen while you were typing, that whatever you happened to be typing at that time will be repeated back to you so you don't lose track of where you were.\n\n4. Configure some wording on R1's Gig0/0 interface (wording that will be displayed in configuration output) that reads, \"Connected to R2\".\n\n5. On both R1 and R2, apply the IPv4 addresses and masks to the various interfaces that were displayed in the previous addressing chart.\n\n6. On both R1 and R2, implement a command that will functionally enable their Gig0/0, Gig0/1 and Gig0/2 interfaces.\n\n7. Save the configuration changes you made to both R1 and R2.\n\n8. In the chart below, write down the appropriate command that would meet the stated objective.  Then implement that command on either R1 or R2 for verification.\n\n|Objective|IOS Command|\n|---|-------|\n|View the operational configuration|\n|View the saved configuration|\n|View the Cisco IOS Software version of the device|\n|View summarized output about the operational state of all interfaces as well as IPv4 addresses configured. All displayed on one screen.|\n|View detailed interface information about Gig0/0 including errors and packet input counters|\n|View the IP Routing Table|",
    "tasks_html": "<p><strong>Task-1: Initial IPv4 Addressing Design</strong></p>\n<p>In this section you will use the VLSM method to design an IPv4 addressing scheme for two routers in your topology.</p>\n<ol>\n<li>Given the starting network shown above the chart (see below), you must use VLSM to divide the network into multiple subnets.</li>\n<li>Subnet zero should be used as your first subnet.</li>\n<li>Each subnet should consume as MANY networking bits as possible</li>\n<li><strong><em>Router interfaces will be assigned the first available host address in each subnet</em></strong> (with the exception of Gi0/0 on routers \u201cR1\u201d and \u201cR2\u201d which will consume all addresses within its network).</li>\n<li>Router Loopback interfaces must be created prior to addressing</li>\n<li>One network has already been completed for you.</li>\n</ol>\n<p><strong><em>Starting Network: 100.1.1.0/24</em></strong></p>\n<table>\n<thead>\n<tr>\n<th>Network</th>\n<th># of Hosts</th>\n<th>Subnet-ID</th>\n<th>Subnet Mask</th>\n<th>Router Interface Address</th>\n</tr>\n</thead>\n<tbody>\n<tr>\n<td>A</td>\n<td>35</td>\n<td></td>\n<td></td>\n<td>R1(Lo0):</td>\n</tr>\n<tr>\n<td>B</td>\n<td>14</td>\n<td></td>\n<td></td>\n<td>R1(Lo1):</td>\n</tr>\n<tr>\n<td>C</td>\n<td>2</td>\n<td></td>\n<td></td>\n<td>R1(Lo2):</td>\n</tr>\n<tr>\n<td>D</td>\n<td>11</td>\n<td></td>\n<td></td>\n<td>R1(Lo3):</td>\n</tr>\n<tr>\n<td>E</td>\n<td>57</td>\n<td></td>\n<td></td>\n<td>R2(Lo0):</td>\n</tr>\n<tr>\n<td>F</td>\n<td>27</td>\n<td></td>\n<td></td>\n<td>R2(Lo1):</td>\n</tr>\n<tr>\n<td>G</td>\n<td>29</td>\n<td></td>\n<td></td>\n<td>R2(Lo2):</td>\n</tr>\n<tr>\n<td>H</td>\n<td>12</td>\n<td></td>\n<td></td>\n<td>R2(Lo3):</td>\n</tr>\n<tr>\n<td>I</td>\n<td>2</td>\n<td>100.1.1.252</td>\n<td>255.255.255.252</td>\n<td>R1(G0/0): .253  R2(G0/0): .254</td>\n</tr>\n<tr>\n<td>J</td>\n<td>6</td>\n<td></td>\n<td></td>\n<td>R2(Lo4):</td>\n</tr>\n</tbody>\n</table>\n<p><strong>Task-2: Initial Router Configuration</strong></p>\n<ol>\n<li>\n<p>At present, when you login to routers R1 or R2 they simply display the name of \"Router\". Change this so that R1 and R2 display unique names.</p>\n</li>\n<li>\n<p>Implement a command so that if you mistype any commands in the future, Cisco IOS will not attempt a DNS resolution of your mistyped command.</p>\n</li>\n<li>\n<p>Implement a command so that if Cisco IOS spontaneously displays some logging or SYSLOG output to the screen while you were typing, that whatever you happened to be typing at that time will be repeated back to you so you don't lose track of where you were.</p>\n</li>\n<li>\n<p>Configure some wording on R1's Gig0/0 interface (wording that will be displayed in configuration output) that reads, \"Connected to R2\".</p>\n</li>\n<li>\n<p>On both R1 and R2, apply the IPv4 addresses and masks to the various interfaces that were displayed in the previous addressing chart.</p>\n</li>\n<li>\n<p>On both R1 and R2, implement a command that will functionally enable their Gig0/0, Gig0/1 and Gig0/2 interfaces.</p>\n</li>\n<li>\n<p>Save the configuration changes you made to both R1 and R2.</p>\n</li>\n<li>\n<p>In the chart below, write down the appropriate command that would meet the stated objective.  Then implement that command on either R1 or R2 for verification.</p>\n</li>\n</ol>\n<table>\n<thead>\n<tr>\n<th>Objective</th>\n<th>IOS Command</th>\n</tr>\n</thead>\n<tbody>\n<tr>\n<td>View the operational configuration</td>\n<td></td>\n</tr>\n<tr>\n<td>View the saved configuration</td>\n<td></td>\n</tr>\n<tr>\n<td>View the Cisco IOS Software version of the device</td>\n<td></td>\n</tr>\n<tr>\n<td>View summarized output about the operational state of all interfaces as well as IPv4 addresses configured. All displayed on one screen.</td>\n<td></td>\n</tr>\n<tr>\n<td>View detailed interface information about Gig0/0 including errors and packet input counters</td>\n<td></td>\n</tr>\n<tr>\n<td>View the IP Routing Table</td>\n<td></td>\n</tr>\n</tbody>\n</table>",
    "published_date": "2022-07-18T16:06:42Z",
    "solutions": "**Solutions:**\n\n***Task-1 Solution***\n\n***NOTE***: Subnets you derived for two-or-more interfaces that require the same mask could be reversed from the solutions chart below. For example, if two interfaces both have the same mask of 255.255.255.252 and the chart lists the subnets as (Interface-1)100.1.1.0/30 and (Interface-2)100.1.1.4/30 it's perfectly acceptable if you swapped these networks.\n\n|Network|# of Hosts|Subnet-ID|Subnet Mask|Router Interface Address|\n|---|---|---|---|---|\n|A| 35|100.1.1.64  |255.255.255.192 |R1(Lo0):100.1.1.65 |\n|B| 14|100.1.1.192  |255.255.255.240 |R1(Lo1):100.1.1.193 |\n|C| 2|100.1.1.248  |255.255.255.252 |R1(Lo2):100.1.1.249 |\n|D| 11|100.1.1.224  |255.255.255.240 |R1(Lo3):100.1.1.225 |\n|E| 57|100.1.1.0  |255.255.255.192 |R2(Lo0):100.1.1.1 |\n|F| 27|100.1.1.160  |255.255.255.224 |R2(Lo1):100.1.1.161 |\n|G| 29|100.1.1.128  |255.255.255.224 |R2(Lo2):100.1.1.129 |\n|H| 12|100.1.1.208 |255.255.255.240 |R2(Lo3):100.1.1.209 |\n|I| 2|100.1.1.252  |255.255.255.252 |R1(G0/0): .253  R2(G0/0): .254 |\n|J| 6|100.1.1.240  |255.255.255.248 |R2(Lo4):100.1.1.241 |\n\n\n***Task-2 Solution***\n\n1. Router(config)#***hostname [name]***\n\n2. R1(config)#***no ip domain-lookup***\n\n3. See below:\n\n    ```\n    R1#configure terminal              \n    Enter configuration commands, one per line.  End with     CNTL/Z.\n    R1(config)#line console 0\n    R1(config-line)#logging synchronous\n    ```\n\n\n4. See below:\n\n    ```\n    R1(config)#interface gig0/0\n    R1(config-if)#description Connected to R2\n    ```\n\n5. Example solution for one interface:\n\n    ```\n    Router(config)#int loopback 0\n    Router(config-if)#ip address 100.1.1.65 255.255.255.192\n    ```\n\n\n6. Example solution for one interface:\n\n    ```\n    Router(config)#int gig 0/0\n    Router(config-if)#no shutdown\n    ```\n\n\n7. There are two methods you could have used to save the configurations to memory:\n\n    ```\n    R1#write memory\n    Building configuration...\n    [OK]\n    R1#\n    ```\n\n    ...or...\n\n    ```\n    R1#copy running-config startup-config\n    Destination filename [startup-config]?\n    Building configuration...\n    [OK]\n    R1#\n    ```\n\n\n8. In the chart below, write down the appropriate command that would meet the stated objective.  Then implement that command on either R1 or R2 for verification.\n\n|Objective|IOS Command|\n|---|-------|\n|View the operational configuration|***show running-config***|\n|View the saved configuration|***show startup-config***\n|View the Cisco IOS Software version of the device|***show version***|\n|View summarized output about the operational state of all interfaces as well as IPv4 addresses configured. All displayed on one screen.|***show ip interface brief***|\n|View detailed interface information about Gig0/0 including errors and packet input counters|***show interfaces gigabitEthernet0/0***|\n|View the IP Routing Table|***show ip route***|",
    "solutions_html": "<p><strong>Solutions:</strong></p>\n<p><strong><em>Task-1 Solution</em></strong></p>\n<p><strong><em>NOTE</em></strong>: Subnets you derived for two-or-more interfaces that require the same mask could be reversed from the solutions chart below. For example, if two interfaces both have the same mask of 255.255.255.252 and the chart lists the subnets as (Interface-1)100.1.1.0/30 and (Interface-2)100.1.1.4/30 it's perfectly acceptable if you swapped these networks.</p>\n<table>\n<thead>\n<tr>\n<th>Network</th>\n<th># of Hosts</th>\n<th>Subnet-ID</th>\n<th>Subnet Mask</th>\n<th>Router Interface Address</th>\n</tr>\n</thead>\n<tbody>\n<tr>\n<td>A</td>\n<td>35</td>\n<td>100.1.1.64</td>\n<td>255.255.255.192</td>\n<td>R1(Lo0):100.1.1.65</td>\n</tr>\n<tr>\n<td>B</td>\n<td>14</td>\n<td>100.1.1.192</td>\n<td>255.255.255.240</td>\n<td>R1(Lo1):100.1.1.193</td>\n</tr>\n<tr>\n<td>C</td>\n<td>2</td>\n<td>100.1.1.248</td>\n<td>255.255.255.252</td>\n<td>R1(Lo2):100.1.1.249</td>\n</tr>\n<tr>\n<td>D</td>\n<td>11</td>\n<td>100.1.1.224</td>\n<td>255.255.255.240</td>\n<td>R1(Lo3):100.1.1.225</td>\n</tr>\n<tr>\n<td>E</td>\n<td>57</td>\n<td>100.1.1.0</td>\n<td>255.255.255.192</td>\n<td>R2(Lo0):100.1.1.1</td>\n</tr>\n<tr>\n<td>F</td>\n<td>27</td>\n<td>100.1.1.160</td>\n<td>255.255.255.224</td>\n<td>R2(Lo1):100.1.1.161</td>\n</tr>\n<tr>\n<td>G</td>\n<td>29</td>\n<td>100.1.1.128</td>\n<td>255.255.255.224</td>\n<td>R2(Lo2):100.1.1.129</td>\n</tr>\n<tr>\n<td>H</td>\n<td>12</td>\n<td>100.1.1.208</td>\n<td>255.255.255.240</td>\n<td>R2(Lo3):100.1.1.209</td>\n</tr>\n<tr>\n<td>I</td>\n<td>2</td>\n<td>100.1.1.252</td>\n<td>255.255.255.252</td>\n<td>R1(G0/0): .253  R2(G0/0): .254</td>\n</tr>\n<tr>\n<td>J</td>\n<td>6</td>\n<td>100.1.1.240</td>\n<td>255.255.255.248</td>\n<td>R2(Lo4):100.1.1.241</td>\n</tr>\n</tbody>\n</table>\n<p><strong><em>Task-2 Solution</em></strong></p>\n<ol>\n<li>\n<p>Router(config)#<strong><em>hostname [name]</em></strong></p>\n</li>\n<li>\n<p>R1(config)#<strong><em>no ip domain-lookup</em></strong></p>\n</li>\n<li>\n<p>See below:</p>\n<pre class=\"codehilite\"><code>R1#configure terminal              \nEnter configuration commands, one per line.  End with     CNTL/Z.\nR1(config)#line console 0\nR1(config-line)#logging synchronous</code></pre>\n\n</li>\n<li>\n<p>See below:</p>\n<pre class=\"codehilite\"><code>R1(config)#interface gig0/0\nR1(config-if)#description Connected to R2</code></pre>\n\n</li>\n<li>\n<p>Example solution for one interface:</p>\n<pre class=\"codehilite\"><code>Router(config)#int loopback 0\nRouter(config-if)#ip address 100.1.1.65 255.255.255.192</code></pre>\n\n</li>\n<li>\n<p>Example solution for one interface:</p>\n<pre class=\"codehilite\"><code>Router(config)#int gig 0/0\nRouter(config-if)#no shutdown</code></pre>\n\n</li>\n<li>\n<p>There are two methods you could have used to save the configurations to memory:</p>\n<pre class=\"codehilite\"><code>R1#write memory\nBuilding configuration...\n[OK]\nR1#</code></pre>\n\n<p>...or...</p>\n<pre class=\"codehilite\"><code>R1#copy running-config startup-config\nDestination filename [startup-config]?\nBuilding configuration...\n[OK]\nR1#</code></pre>\n\n</li>\n<li>\n<p>In the chart below, write down the appropriate command that would meet the stated objective.  Then implement that command on either R1 or R2 for verification.</p>\n</li>\n</ol>\n<table>\n<thead>\n<tr>\n<th>Objective</th>\n<th>IOS Command</th>\n</tr>\n</thead>\n<tbody>\n<tr>\n<td>View the operational configuration</td>\n<td><strong><em>show running-config</em></strong></td>\n</tr>\n<tr>\n<td>View the saved configuration</td>\n<td><strong><em>show startup-config</em></strong></td>\n</tr>\n<tr>\n<td>View the Cisco IOS Software version of the device</td>\n<td><strong><em>show version</em></strong></td>\n</tr>\n<tr>\n<td>View summarized output about the operational state of all interfaces as well as IPv4 addresses configured. All displayed on one screen.</td>\n<td><strong><em>show ip interface brief</em></strong></td>\n</tr>\n<tr>\n<td>View detailed interface information about Gig0/0 including errors and packet input counters</td>\n<td><strong><em>show interfaces gigabitEthernet0/0</em></strong></td>\n</tr>\n<tr>\n<td>View the IP Routing Table</td>\n<td><strong><em>show ip route</em></strong></td>\n</tr>\n</tbody>\n</table>",
    "flags": [],
    "min_points_to_pass": null,
    "access_type": "default",
    "user_status": "unstarted",
    "user_lab_status": null,
    "user_status_modified": null,
    "user_flags": [],
    "global_running_session": null
}