WEBVTT

0:00:09.720000 --> 0:00:13.100000
 Hello and welcome to this video which
 is part of the CCNA exam assessment

0:00:13.100000 --> 0:00:16.740000
 series. In this video I'm going to
 be assessing you on your knowledge

0:00:16.740000 --> 0:00:22.220000
 and memory of wireless principles.


0:00:22.220000 --> 0:00:25.220000
 Question number one.

0:00:25.220000 --> 0:00:32.600000
 What IEEE standard, which has been
 amended many times over the years,

0:00:32.600000 --> 0:00:36.820000
 defines wireless LAN operations
 and protocols.

0:00:36.820000 --> 0:00:46.860000
 And that would be
 answer D, 802.11.

0:00:46.860000 --> 0:00:57.780000
 Question two. A single wireless access
 point and it's a set of associated

0:00:57.780000 --> 0:01:04.020000
 wireless clients all comprise
 a single what?

0:01:04.020000 --> 0:01:10.080000
 That would be a single BSS.

0:01:10.080000 --> 0:01:13.260000
 Now I'm not going to tell you what a
 BSS is because there might be another

0:01:13.260000 --> 0:01:17.320000
 question coming up asking you to define
 what that acronym is but hopefully

0:01:17.320000 --> 0:01:23.300000
 you know it. Question three.

0:01:23.300000 --> 0:01:37.840000
 Which of the following statements
 about a BSSID are true?

0:01:37.840000 --> 0:01:45.340000
 Answer A. The BSSID is the MAC
 address of the access point.

0:01:45.340000 --> 0:01:56.880000
 Question four. When clicking on your
 Wi-Fi adapter you see the following

0:01:56.880000 --> 0:01:58.960000
 available networks.

0:01:58.960000 --> 0:02:04.360000
 Each of the names of these networks represents
 a what that has been advertised

0:02:04.360000 --> 0:02:06.180000
 by an access point.

0:02:06.180000 --> 0:02:08.220000
 So what do those names represent?

0:02:08.220000 --> 0:02:11.880000
 What's the technical
 term for those names?

0:02:11.880000 --> 0:02:25.120000
 Those names would be called an
 SSID, a service set identifier.

0:02:25.120000 --> 0:02:36.660000
 Question five. In 802.11 terminology
 what name is given to the upstream

0:02:36.660000 --> 0:02:41.680000
 wired connection or the wired network
 that's connected to a wireless access

0:02:41.680000 --> 0:02:51.040000
 point? That is considered
 the distribution system.

0:02:51.040000 --> 0:02:54.900000
 So within 802.11 documents that's what
 they would call it the distribution

0:02:54.900000 --> 0:03:04.620000
 system. Question six.

0:03:04.620000 --> 0:03:10.600000
 Which of the following is a benefit
 of advertising multiple SSIDs each

0:03:10.600000 --> 0:03:15.700000
 assigned to its own VLAN from a
 single wireless access point?

0:03:15.700000 --> 0:03:23.940000
 None of those answers are correct.


0:03:23.940000 --> 0:03:26.500000
 So let's go through each
 of these answers here.

0:03:26.500000 --> 0:03:30.560000
 Answer A. It allows more clients to
 be associated to that access point

0:03:30.560000 --> 0:03:33.820000
 than if it were advertising
 on a single SSID.

0:03:33.820000 --> 0:03:35.580000
 That is incorrect.

0:03:35.580000 --> 0:03:41.940000
 An access point only has a single maximum
 quantity of clients that can

0:03:41.940000 --> 0:03:43.300000
 be associated to it.

0:03:43.300000 --> 0:03:48.740000
 Whether all those clients are associated
 to one SSID or six SSIDs it doesn't

0:03:48.740000 --> 0:03:53.960000
 matter. So adding more SSIDs to your
 access point does not increase that

0:03:53.960000 --> 0:03:57.620000
 maximum quantity of clients
 it can support.

0:03:57.620000 --> 0:04:02.320000
 B. It allows more clients to communicate
 to the access point at the same

0:04:02.320000 --> 0:04:05.420000
 time. That is also incorrect.

0:04:05.420000 --> 0:04:10.300000
 Through most of the 802.11 standards
 only one client can communicate to

0:04:10.300000 --> 0:04:15.060000
 the access point at any given time because
 a radio is only listening to

0:04:15.060000 --> 0:04:19.840000
 one receiver. In some of the more advanced
 standards it's true that if

0:04:19.840000 --> 0:04:22.240000
 clients are using some of the more advanced
 standards they might be able

0:04:22.240000 --> 0:04:26.460000
 to communicate at the same time but
 that has nothing to do with how many

0:04:26.460000 --> 0:04:28.880000
 SSIDs you happen to have.

0:04:28.880000 --> 0:04:33.500000
 C. It places clients into separate
 collision domains.

0:04:33.500000 --> 0:04:34.900000
 That's incorrect.

0:04:34.900000 --> 0:04:40.340000
 So whether you have one SSID or ten
 SSIDs they're all being advertised

0:04:40.340000 --> 0:04:42.080000
 by the same radio.

0:04:42.080000 --> 0:04:45.100000
 Let's just say they're all I'm not going
 to say what that radio is because

0:04:45.100000 --> 0:04:49.220000
 it might be another question but one
 radio on a particular frequency is

0:04:49.220000 --> 0:04:51.160000
 advertising all those SSIDs.

0:04:51.160000 --> 0:04:55.200000
 So everybody is in one big collision
 domain whether they're all in one

0:04:55.200000 --> 0:05:00.300000
 SSID or they divide between six SSIDs
 they're all contending for the same

0:05:00.300000 --> 0:05:03.680000
 airspace. And D.

0:05:03.680000 --> 0:05:07.220000
 It allows clients from different SSIDs
 to be placed onto different wireless

0:05:07.220000 --> 0:05:09.340000
 channels. That's also wrong.

0:05:09.340000 --> 0:05:14.300000
 Once again only a single radio is advertising
 those SSIDs and that radio

0:05:14.300000 --> 0:05:17.140000
 is on one particular channel.

0:05:17.140000 --> 0:05:21.880000
 A single radio cannot operate simultaneously
 across different channels

0:05:21.880000 --> 0:05:23.360000
 it can't do that.

0:05:23.360000 --> 0:05:28.540000
 So none of these answers
 were correct.

0:05:28.540000 --> 0:05:38.040000
 Question seven. Which of the following
 statements is true about an 802

0:05:38.040000 --> 0:05:50.240000
.11 ESS? So the correct answers here
 the two answers were it requires at

0:05:50.240000 --> 0:05:54.060000
 least two access points connected
 to the same distribution system.

0:05:54.060000 --> 0:05:59.220000
 In other words connected to the same
 wired network and if using two or

0:05:59.220000 --> 0:06:04.420000
 more access points they should all advertise
 the same SSIDs that way clients

0:06:04.420000 --> 0:06:08.560000
 can move back and forth between the access
 points seamlessly without even

0:06:08.560000 --> 0:06:11.560000
 really knowing that they're
 changing access points.

0:06:11.560000 --> 0:06:14.640000
 That is the definition of an ESS.

0:06:14.640000 --> 0:06:22.340000
 Question number eight.

0:06:22.340000 --> 0:06:29.040000
 Which of the following elements would
 you find in an 802.11 IBSS?

0:06:29.040000 --> 0:06:39.200000
 You would find two wireless
 stations and an RF channel.

0:06:39.200000 --> 0:06:45.280000
 Remember that in an IBSS that is the
 situation where two wireless clients

0:06:45.280000 --> 0:06:50.620000
 like two laptops for example are wirelessly
 connecting to each other.

0:06:50.620000 --> 0:06:53.500000
 They're not using an access point they're
 connecting directly to each

0:06:53.500000 --> 0:06:57.840000
 other and speaking wirelessly in like
 a point to point type of scenario.

0:06:57.840000 --> 0:07:01.640000
 So it's two stations and they're still
 using a radio frequency channel

0:07:01.640000 --> 0:07:05.380000
 to communicate with each other.

0:07:05.380000 --> 0:07:17.460000
 Question nine. What is the basic unit
 of measurement for measuring the

0:07:17.460000 --> 0:07:21.660000
 frequency of an electromagnetic
 wave?

0:07:21.660000 --> 0:07:28.860000
 The correct answer is B, Hertz.

0:07:28.860000 --> 0:07:35.260000
 Hertz is used to measure the
 frequency of something.

0:07:35.260000 --> 0:07:46.020000
 Question ten. Which of the following
 answers is equivalent to a wave that

0:07:46.020000 --> 0:07:54.880000
 oscillates or changes 5
,000 times per second?

0:07:54.880000 --> 0:07:59.920000
 The correct answer there
 is C, 5 kilohertz.

0:07:59.920000 --> 0:08:07.720000
 The first answer A, 5 Hertz is changing
 only 5 times per second.

0:08:07.720000 --> 0:08:20.280000
 The second answer is changing
 500 times per second.

0:08:20.280000 --> 0:08:25.320000
 So that's why C is correct.

0:08:25.320000 --> 0:08:28.220000
 Question eleven.

0:08:28.220000 --> 0:08:40.480000
 Which two radio frequency bands are most
 commonly used for wireless LANs?

0:08:40.480000 --> 0:08:46.060000
 Select two answers.

0:08:46.060000 --> 0:08:53.520000
 The correct answers are the 2.4 gigahertz
 range and the 5 gigahertz range.

0:08:53.520000 --> 0:08:58.260000
 Question twelve.

0:08:58.260000 --> 0:09:07.200000
 When using the 2.4 gigahertz band for
 Wi-Fi, what channels, if designed

0:09:07.200000 --> 0:09:14.540000
 properly, can be three answers?

0:09:14.540000 --> 0:09:26.720000
 The correct answer is our channels
 one, six and eleven.

0:09:26.720000 --> 0:09:30.120000
 Question thirteen.

0:09:30.120000 --> 0:09:39.900000
 Which of the following IEEE 802.11 amendments
 do not operate within the

0:09:39.900000 --> 0:09:41.320000
 5 gigahertz band?

0:09:41.320000 --> 0:09:45.460000
 Select two answers.

0:09:45.460000 --> 0:09:54.860000
 That would be the 802.11B and
 the 802.11G amendments.

0:09:54.860000 --> 0:10:03.080000
 Both of those specify only using
 the 2.4 gigahertz bands.

0:10:03.080000 --> 0:10:09.720000
 Question fourteen.

0:10:09.720000 --> 0:10:15.780000
 Which of the statements about using encryption
 in Wi-Fi networks is true?

0:10:15.780000 --> 0:10:17.820000
 Select two answers.

0:10:17.820000 --> 0:10:27.180000
 The correct answers are A, all clients
 in the same BSS must use the same

0:10:27.180000 --> 0:10:33.680000
 encryption method and D, each client
 is given a unique encryption key.

0:10:33.680000 --> 0:10:36.900000
 That's how you and I can be connected
 to the same access point.

0:10:36.900000 --> 0:10:40.540000
 We're both doing encryption, but I
 can't read your stuff and you can't

0:10:40.540000 --> 0:10:44.320000
 read mine because we both have
 unique encryption keys.

0:10:44.320000 --> 0:10:53.640000
 Question fifteen and our final
 question for this section.

0:10:53.640000 --> 0:10:58.840000
 When using Wi-Fi encryption, what is
 the purpose of the group encryption

0:10:58.840000 --> 0:11:09.680000
 key? And the answer is A, to encrypt
 packets sent from the access point

0:11:09.680000 --> 0:11:13.640000
 meant for every station
 to receive.

0:11:13.640000 --> 0:11:17.840000
 So for example, if from the distribution
 system from the wired network

0:11:17.840000 --> 0:11:22.700000
 comes some sort of broadcast or multicast
 packet that's meant for all

0:11:22.700000 --> 0:11:27.760000
 of the clients in the Wi-Fi to get
 that, the access point will encrypt

0:11:27.760000 --> 0:11:33.360000
 that using the group encryption
 key which everybody can decrypt.

0:11:33.360000 --> 0:11:38.460000
 That way that packet can be sent
 and heard by all of the clients.

0:11:38.460000 --> 0:11:42.800000
 So that concludes this section
 of our assessment.

0:11:42.800000 --> 0:11:45.180000
 Thank you for watching and I
 hope it was helpful for you.

