WEBVTT

0:00:03.120000 --> 0:00:07.040000
 In this video for our CCNA Bootcamp,
 I'd like to just do a quick review

0:00:07.040000 --> 0:00:08.900000
 of virtual lands.

0:00:08.900000 --> 0:00:11.420000
 So first of all, we know that what
 was a virtual land, a virtual land

0:00:11.420000 --> 0:00:12.880000
 is a broadcast domain.

0:00:12.880000 --> 0:00:18.300000
 So if I decide that I have my switch
 right here and I've got these ports

0:00:18.300000 --> 0:00:23.900000
 which are connected to a set of devices,
 maybe a bunch of devices all

0:00:23.900000 --> 0:00:27.560000
 in the same department, and I've got
 another set of ports on that same

0:00:27.560000 --> 0:00:32.180000
 switch connected to other devices, printers,
 fast machines, laptops, but

0:00:32.180000 --> 0:00:34.340000
 these are in a different
 department.

0:00:34.340000 --> 0:00:37.620000
 And I decided that for security purposes,
 which is usually the primary

0:00:37.620000 --> 0:00:40.220000
 reason, I want to keep
 these guys separate.

0:00:40.220000 --> 0:00:42.980000
 So from a layer three perspective,
 I want to start by putting them in

0:00:42.980000 --> 0:00:44.440000
 different networks.

0:00:44.440000 --> 0:00:57.520000
 Maybe these people here will be in
 the 2020-2020 So keep them separate

0:00:57.520000 --> 0:00:59.040000
 from layer three, right?

0:00:59.040000 --> 0:01:01.460000
 That way I can implement access
 lists or something.

0:01:01.460000 --> 0:01:04.020000
 And then at layer two,
 I just use VLANs.

0:01:04.020000 --> 0:01:10.780000
 I say, okay, you guys, you'll be in VLAN,
 how about 10, and you guys here,

0:01:10.780000 --> 0:01:14.560000
 all these ports can be in VLAN 20.


0:01:14.560000 --> 0:01:19.200000
 Okay? And if you recall from your review,
 using VLANs or configuring VLANs

0:01:19.200000 --> 0:01:21.020000
 is a two-step process.

0:01:21.020000 --> 0:01:25.120000
 Number one, we typically configure or create
 the VLAN at global configuration

0:01:25.120000 --> 0:01:29.980000
 level. Then we go to the interface,
 usually using interface range if we

0:01:29.980000 --> 0:01:33.940000
 want to do a variety of interfaces at
 once, and we apply the VLAN there

0:01:33.940000 --> 0:01:35.780000
 to the interface.

0:01:35.780000 --> 0:01:40.260000
 Some switches will allow you
 to skip step number one.

0:01:40.260000 --> 0:01:43.400000
 Some switches will allow you to go
 right to the interface and apply a

0:01:43.400000 --> 0:01:45.360000
 VLAN that doesn't even exist.

0:01:45.360000 --> 0:01:49.920000
 And once it sees that, it will dynamically
 create the VLAN for you.

0:01:49.920000 --> 0:01:51.360000
 But don't guarantee that.

0:01:51.360000 --> 0:01:55.080000
 Don't bank on that, because not
 all switches have that behavior.

0:01:55.080000 --> 0:02:01.560000
 All right, so the legacy method, which
 you'll probably see less and less

0:02:01.560000 --> 0:02:05.780000
 and less over the years, was to go into
 VLAN database mode from privilege

0:02:05.780000 --> 0:02:08.480000
 exec mode and configure
 your VLAN there.

0:02:08.480000 --> 0:02:12.680000
 Even if you have a switch that still
 supports that, which is unlikely,

0:02:12.680000 --> 0:02:14.660000
 it's not advisable to do that.

0:02:14.660000 --> 0:02:19.220000
 Several other switching features will not
 work if your VLAN has been configured

0:02:19.220000 --> 0:02:20.420000
 in VLAN database mode.

0:02:20.420000 --> 0:02:24.540000
 So it's better just to go into global
 configuration, configure your VLAN

0:02:24.540000 --> 0:02:28.900000
 there, which is simply just the command
 VLAN and the VLAN number.

0:02:28.900000 --> 0:02:31.520000
 And then optionally, you
 don't have to do this.

0:02:31.520000 --> 0:02:35.480000
 Give it a name. That way, somebody who
 looks at your config later on can

0:02:35.480000 --> 0:02:38.340000
 identify what the purpose
 of that VLAN is.

0:02:38.340000 --> 0:02:42.460000
 If they go into the show VLAN output
 and they see VLAN 2, VLAN 30, VLAN

0:02:42.460000 --> 0:02:45.920000
 99, they'll have no idea
 what it leads VLANs me.

0:02:45.920000 --> 0:02:47.400000
 Why are they here?

0:02:47.400000 --> 0:02:51.720000
 Well, if you say VLAN 2, and then you
 say name payroll, VLAN 30, name

0:02:51.720000 --> 0:02:56.220000
 marketing. Well, now that will show
 up in the output of show VLAN and

0:02:56.220000 --> 0:02:59.220000
 people will have a better understanding
 of why you create that VLAN in

0:02:59.220000 --> 0:03:03.920000
 the first place and where
 it connects to.

0:03:03.920000 --> 0:03:09.020000
 Okay, so terminology wise, an access port
 is a switching port that's configured

0:03:09.020000 --> 0:03:11.100000
 for only one VLAN.

0:03:11.100000 --> 0:03:14.760000
 By default, when you configure a port
 as an access port, it will be in

0:03:14.760000 --> 0:03:22.140000
 VLAN 1. So here we see where we've configured
 the interface as an access

0:03:22.140000 --> 0:03:25.600000
 port. So there's no possibility
 of trunking.

0:03:25.600000 --> 0:03:29.800000
 Once a port is configured as a switch
 port mode access, it will not trunk,

0:03:29.800000 --> 0:03:33.880000
 even if it's connected to a device
 on the other side that's trying to

0:03:33.880000 --> 0:03:37.860000
 trunk. Switch port access says, nope,
 I'm not allowed to do that.

0:03:37.860000 --> 0:03:41.800000
 And then to place that access port into
 a VLAN of your choosing, you use

0:03:41.800000 --> 0:03:47.700000
 the switch port access VLAN command,
 like switch port access VLAN 99 would

0:03:47.700000 --> 0:03:49.820000
 put that port into VLAN 99.

0:03:49.820000 --> 0:03:54.240000
 And like I said, a lot of Cisco switches,
 if VLAN 99 did not already exist,

0:03:54.240000 --> 0:04:02.380000
 it would dynamically be created
 simply by doing this.

0:04:02.380000 --> 0:04:05.620000
 And verification of your
 VLANs is very simple.

0:04:05.620000 --> 0:04:09.700000
 Just show VLAN or show
 interface switch port.

0:04:09.700000 --> 0:04:15.120000
 So just to give a quick demonstration
 of this, I'm going to go into one

0:04:15.120000 --> 0:04:16.800000
 of our switches here.

0:04:16.800000 --> 0:04:22.380000
 So the first thing I'd want about is
 does the switch have any existing

0:04:22.380000 --> 0:04:27.340000
 VLANs? Show VLAN.

0:04:27.340000 --> 0:04:29.540000
 And we can see it has
 the default VLAN.

0:04:29.540000 --> 0:04:35.640000
 And it has some of these reserved
 unsupported VLANs.

0:04:35.640000 --> 0:04:38.700000
 These are from way back in the old days
 and for the last couple decades,

0:04:38.700000 --> 0:04:41.600000
 you just can't use them anymore.

0:04:41.600000 --> 0:04:51.900000
 So if we're going to create a VLAN,
 we could say VLAN 99, name payroll,

0:04:51.900000 --> 0:04:59.440000
 show VLAN. And there we see VLAN
 99 described as payroll.

0:04:59.440000 --> 0:05:02.800000
 However, knows that there's no
 listing of ports after that.

0:05:02.800000 --> 0:05:06.580000
 See, normally if there were any ports
 that were actively using VLAN 99,

0:05:06.580000 --> 0:05:08.120000
 it would show up somewhere
 right here.

0:05:08.120000 --> 0:05:09.640000
 And we don't see that.

0:05:09.640000 --> 0:05:12.980000
 So that could mean
 one of two things.

0:05:12.980000 --> 0:05:17.160000
 It could mean that there are no ports
 on this switch, which are carrying

0:05:17.160000 --> 0:05:20.980000
 traffic for VLAN 99.

0:05:20.980000 --> 0:05:26.560000
 But if that were the case, then this
 would not say active, that would

0:05:26.560000 --> 0:05:30.720000
 say inactive. So if you see inactive,
 that means, hey, I know the VLAN

0:05:30.720000 --> 0:05:34.360000
 exists on me, but I have no interfaces
 which are carrying that VLAN.

0:05:34.360000 --> 0:05:37.040000
 So active, hmm, what
 does that mean?

0:05:37.040000 --> 0:05:41.740000
 Well, the combination of active, but
 this right here being blank, means

0:05:41.740000 --> 0:05:45.560000
 I don't have any access ports
 carrying that VLAN.

0:05:45.560000 --> 0:05:50.640000
 But I probably do have a trunk port,
 because remember, by default, if

0:05:50.640000 --> 0:05:55.360000
 you have a VLAN trunk, all the VLANs
 that are known on that switch are

0:05:55.360000 --> 0:05:57.860000
 carried by that trunk.

0:05:57.860000 --> 0:06:06.980000
 And we can test that by typing the
 command show interface trunk.

0:06:06.980000 --> 0:06:09.640000
 Ah, we don't have any.

0:06:09.640000 --> 0:06:13.640000
 Okay, so it looks like nothing's
 going to carry this.

0:06:13.640000 --> 0:06:16.800000
 Usually it would say inactive.

0:06:16.800000 --> 0:06:21.260000
 But this is a virtualized switch, which
 operates a little bit differently

0:06:21.260000 --> 0:06:23.060000
 than a real physical switch.

0:06:23.060000 --> 0:06:28.820000
 But the main point is, if you have
 any access ports in that VLAN, they

0:06:28.820000 --> 0:06:30.400000
 would show up right here.

0:06:30.400000 --> 0:06:35.360000
 I'll demonstrate that.

0:06:35.360000 --> 0:06:38.060000
 Show IP interface brief.

0:06:38.060000 --> 0:06:40.600000
 What have we got that
 we can play with?

0:06:40.600000 --> 0:06:44.860000
 All right, interface gigabit
 two slash one.

0:06:44.860000 --> 0:06:48.740000
 Switch port mode access.

0:06:48.740000 --> 0:06:53.980000
 Switch port access VLAN 99.

0:06:53.980000 --> 0:07:01.020000
 And now when we do show VLAN, we can
 see that VLAN 99 does indeed have

0:07:01.020000 --> 0:07:07.520000
 an interface after it, which
 is an access port.

0:07:07.520000 --> 0:07:10.180000
 So that is how you do that.

0:07:10.180000 --> 0:07:16.580000
 Another way that you can verify that is
 if you have an interface in question,

0:07:16.580000 --> 0:07:20.340000
 you say, hmm, I wonder if this
 interface is an access port.

0:07:20.340000 --> 0:07:23.340000
 I wonder what VLAN this
 interface is carrying.

0:07:23.340000 --> 0:07:30.080000
 You can do show interface,
 like gig two slash one.

0:07:30.080000 --> 0:07:33.880000
 Now, if I just hit enter right now,
 I will not get the answers to those

0:07:33.880000 --> 0:07:37.220000
 questions. The questions of,
 is this an access port?

0:07:37.220000 --> 0:07:39.200000
 What VLANs on this port?

0:07:39.200000 --> 0:07:45.080000
 Just the show interfaces by itself just
 shows me like statistics and errors.

0:07:45.080000 --> 0:07:48.500000
 But if I do that exact same command,
 I put the keyword of switch port

0:07:48.500000 --> 0:07:49.800000
 at the end of it.

0:07:49.800000 --> 0:07:52.360000
 Now we get all different output.

0:07:52.360000 --> 0:07:58.160000
 And we can see that administratively,
 this has been configured to be a

0:07:58.160000 --> 0:08:00.180000
 static access port.

0:08:00.180000 --> 0:08:03.940000
 So if you ever see a lab in the lab
 says configure interface blah, blah,

0:08:03.940000 --> 0:08:06.220000
 blah, blah, as a static
 access port.

0:08:06.220000 --> 0:08:11.360000
 That means translation configure
 switch port mode access.

0:08:11.360000 --> 0:08:15.020000
 Switch port mode access converts
 it into a static access port.

0:08:15.020000 --> 0:08:17.360000
 Operationally, what's it doing?

0:08:17.360000 --> 0:08:21.760000
 Because it could be configured one
 way, but not actually doing that.

0:08:21.760000 --> 0:08:23.600000
 It could be operating
 a different way.

0:08:23.600000 --> 0:08:27.240000
 In this case, we can see, yes, it is
 also operating as a static access

0:08:27.240000 --> 0:08:32.520000
 port and says right down here, if I
 am a static access port, which I am,

0:08:32.520000 --> 0:08:36.500000
 I will be in VLAN 99,
 the payroll VLAN.

0:08:36.500000 --> 0:08:41.820000
 So that was a result of show interfaces,
 the interface you are interested

0:08:41.820000 --> 0:08:48.120000
 in, followed by the
 switch port keyword.

0:08:48.120000 --> 0:08:54.160000
 And that concludes this video on the basics
 of what VLANs are and configuring

0:08:54.160000 --> 0:08:56.420000
 and applying VLANs
 to an interface.

