WEBVTT

0:00:03.200000 --> 0:00:06.160000
 Hello and welcome to this video, which
 we're going to offer a refresher

0:00:06.160000 --> 0:00:08.220000
 on how do you monitor
 port security?

0:00:08.220000 --> 0:00:11.560000
 How do you monitor that's been configured
 and what its operational state

0:00:11.560000 --> 0:00:15.560000
 is and what it has currently
 learned and what it's doing?

0:00:15.560000 --> 0:00:20.920000
 So there's about three commands that you
 will use to monitor port security.

0:00:20.920000 --> 0:00:25.260000
 The first one is this high level
 show port-security command.

0:00:25.260000 --> 0:00:30.680000
 So if your main objective is to find out,
 A, do I have port security already

0:00:30.680000 --> 0:00:32.260000
 configured on any interfaces?

0:00:32.260000 --> 0:00:35.400000
 And if so, what interfaces
 are they?

0:00:35.400000 --> 0:00:38.820000
 B, what is the violation
 mode of those interfaces?

0:00:38.820000 --> 0:00:42.080000
 And C, how many violations
 have occurred?

0:00:42.080000 --> 0:00:44.820000
 This command will show you all
 of that in this output here.

0:00:44.820000 --> 0:00:46.120000
 You can see that.

0:00:46.120000 --> 0:00:50.320000
 If you want to drill into a particular
 interface and get a little bit

0:00:50.320000 --> 0:00:54.900000
 more detail, you can do show port-security
 interface and then interface

0:00:54.900000 --> 0:00:56.500000
 name and number.

0:00:56.500000 --> 0:00:59.800000
 And this shows you a variety
 of good information.

0:00:59.800000 --> 0:01:04.060000
 This shows you that the feature has
 been enabled on this interface.

0:01:04.060000 --> 0:01:07.220000
 It shows you that currently
 this interface is good.

0:01:07.220000 --> 0:01:08.800000
 It's securely up.

0:01:08.800000 --> 0:01:12.460000
 It shows you that the violation
 mode is restrict.

0:01:12.460000 --> 0:01:15.620000
 So we know that if a violation
 happens, what does that mean?

0:01:15.620000 --> 0:01:21.160000
 That means that, um, that, um, that
 offending frames will be discarded.

0:01:21.160000 --> 0:01:25.940000
 And with restrict, we will see
 this counter right here.

0:01:25.940000 --> 0:01:28.300000
 The security violation count.

0:01:28.300000 --> 0:01:34.360000
 If this instead was in protect mode,
 this counter here would be useless.

0:01:34.360000 --> 0:01:35.560000
 It would never change.

0:01:35.560000 --> 0:01:38.460000
 Even if there were thousands of violations,
 nothing would be recording

0:01:38.460000 --> 0:01:44.100000
 of that. Here we see that an aging time
 apparently has been configured.

0:01:44.100000 --> 0:01:46.000000
 An absolute aging time
 of one minute.

0:01:46.000000 --> 0:01:47.840000
 That's not the default.

0:01:47.840000 --> 0:01:51.900000
 We can see that a maximum of
 three addresses are allowed.

0:01:51.900000 --> 0:01:54.840000
 Currently, only one address
 has been learned.

0:01:54.840000 --> 0:01:58.160000
 No addresses have been
 statically configured.

0:01:58.160000 --> 0:02:03.580000
 Sticky Mac addresses have been configured
 so that one address has been

0:02:03.580000 --> 0:02:06.620000
 placed as part of the configuration
 is a sticky Mac.

0:02:06.620000 --> 0:02:09.740000
 And we see right here
 what that address is.

0:02:09.740000 --> 0:02:12.740000
 And this is the VLAN
 that that port is in.

0:02:12.740000 --> 0:02:14.260000
 So a lot of good information.

0:02:14.260000 --> 0:02:17.240000
 This is my favorite command for
 monitoring port security.

0:02:17.240000 --> 0:02:21.020000
 If you know in advance
 what interface it's on.

0:02:21.020000 --> 0:02:25.220000
 Then also you can do show
 port security address.

0:02:25.220000 --> 0:02:28.040000
 And this gives you a high level overview
 of all the Mac addresses that

0:02:28.040000 --> 0:02:32.400000
 have been learned via port security
 and what interfaces they have been

0:02:32.400000 --> 0:02:37.900000
 learned on. So that concludes this
 video of the three various commands

0:02:37.900000 --> 0:02:40.100000
 you can use to monitor
 port security.

