WEBVTT

0:00:03.200000 --> 0:00:07.160000
 Hello and welcome to this video in which
 I'd like to do a review of configuring

0:00:07.160000 --> 0:00:12.360000
 DHCP snooping in Cisco iOS and
 how you monitor and verify it.

0:00:12.360000 --> 0:00:15.180000
 So that's what we're
 going to look at.

0:00:15.180000 --> 0:00:17.360000
 Let's jump right into it.

0:00:17.360000 --> 0:00:21.800000
 So DHCP snooping, your very first command
 is just to enable it globally

0:00:21.800000 --> 0:00:24.880000
 with IP DHCP snooping.

0:00:24.880000 --> 0:00:29.960000
 Now this command on the outside doesn't
 really look like it's doing a

0:00:29.960000 --> 0:00:33.260000
 lot because the second thing you have
 to do is basically replicate it

0:00:33.260000 --> 0:00:35.920000
 but this time specify the VLAN.

0:00:35.920000 --> 0:00:37.660000
 So what does the first command do?


0:00:37.660000 --> 0:00:43.620000
 Well, here's an analogy I can paint that
 will hopefully help clarify this.

0:00:43.620000 --> 0:00:47.660000
 If you're familiar with routing protocols,
 all right, you know on Cisco

0:00:47.660000 --> 0:00:52.020000
 routers or even Cisco switches that
 support routing, what's the first

0:00:52.020000 --> 0:00:54.500000
 command you do to start
 your routing protocol?

0:00:54.500000 --> 0:00:58.160000
 Don't you go to the global configuration
 level and then type router and

0:00:58.160000 --> 0:01:03.940000
 then the name like router rip, router
 ERP, router OSPF and yet if that

0:01:03.940000 --> 0:01:07.880000
 was the only thing you typed, it kind
 of looks like it's not doing anything.

0:01:07.880000 --> 0:01:09.760000
 So what's the purpose
 of that command?

0:01:09.760000 --> 0:01:13.160000
 Well, in the world of routing protocols,
 think about it this way.

0:01:13.160000 --> 0:01:17.680000
 All routing protocols need to have a
 certain section of memory that they

0:01:17.680000 --> 0:01:19.920000
 use for their databases
 and their tables.

0:01:19.920000 --> 0:01:24.880000
 So for example, when you enable rip
 as a routing protocol, rip reserves

0:01:24.880000 --> 0:01:28.880000
 some of your memory and stores its rip
 database in there of all the rip

0:01:28.880000 --> 0:01:30.640000
 routes it's learned about.

0:01:30.640000 --> 0:01:35.420000
 EIGRP takes some of the memory and
 converts it into an EIGRP topology

0:01:35.420000 --> 0:01:38.020000
 table for storing of EIGRP routes.


0:01:38.020000 --> 0:01:43.420000
 So when you say router rip, router ERP,
 router OSPF or even router BGP,

0:01:43.420000 --> 0:01:46.480000
 before you do anything else after that,
 it's like you're telling your

0:01:46.480000 --> 0:01:48.540000
 CPU, hey, get ready.

0:01:48.540000 --> 0:01:50.500000
 I'm going to run this protocol.

0:01:50.500000 --> 0:01:54.340000
 So can you start formatting the memory
 and creating these data structures

0:01:54.340000 --> 0:01:59.540000
 in advance? So when I actually enable
 the protocol on an interface, we're

0:01:59.540000 --> 0:02:02.800000
 ready to go. We got the tables all
 set up in memory and ready to start

0:02:02.800000 --> 0:02:04.820000
 populating them with information.

0:02:04.820000 --> 0:02:06.160000
 Same thing is true here.

0:02:06.160000 --> 0:02:10.180000
 Remember, DHCP snooping in the background
 in memory is going to populate

0:02:10.180000 --> 0:02:14.480000
 something called an IP DHCP
 snooping binding database.

0:02:14.480000 --> 0:02:17.540000
 Well, that's what this
 command is doing.

0:02:17.540000 --> 0:02:21.600000
 It's structuring and formatting and
 building that database in advance.

0:02:21.600000 --> 0:02:26.620000
 So it's ready to go once we actually
 enable DHCP snooping on a particular

0:02:26.620000 --> 0:02:30.420000
 VLAN. That's what's happening, even though
 you don't really see that with,

0:02:30.420000 --> 0:02:32.940000
 you know, syslog messages
 or anything.

0:02:32.940000 --> 0:02:37.440000
 So next, we have to enable DHCP snooping
 on whatever VLAN we wish.

0:02:37.440000 --> 0:02:42.620000
 Now we're not quite done yet because
 if this was all we did, DHCP wouldn't

0:02:42.620000 --> 0:02:46.920000
 work for anybody on that VLAN because
 as soon as you hit enter for that

0:02:46.920000 --> 0:02:52.180000
 command, now all the ports in that
 VLAN become DHCP snooping untrusted

0:02:52.180000 --> 0:02:56.800000
 interfaces, even the interface or interfaces
 that are leading to your

0:02:56.800000 --> 0:02:59.540000
 real legitimate DHCP servers.

0:02:59.540000 --> 0:03:01.720000
 And we need those interfaces
 to be trusted.

0:03:01.720000 --> 0:03:06.080000
 So then we want to go to the interface
 where that server lives and type

0:03:06.080000 --> 0:03:10.480000
 ipdcp snooping trust, make
 it a trusted interface.

0:03:10.480000 --> 0:03:11.740000
 Now, notice here there
 was one other command.

0:03:11.740000 --> 0:03:12.700000
 This is optional.

0:03:12.700000 --> 0:03:16.500000
 You don't have to do it where you can
 do DHCP snooping rate limiting.

0:03:16.500000 --> 0:03:20.180000
 If you're concerned that somebody might
 be trying to attack your server

0:03:20.180000 --> 0:03:27.900000
 by sending to it, you know, 1000 DHCP packets
 every second to try to overwhelm

0:03:27.900000 --> 0:03:31.640000
 the server, you could use this command
 here to try to prevent that from

0:03:31.640000 --> 0:03:38.180000
 happening. Now, this is also a very important
 command, especially if you're

0:03:38.180000 --> 0:03:41.960000
 doing this in a lab environment, hint
 hint, so pay a special attention

0:03:41.960000 --> 0:03:48.760000
 to this. So DHCP is built around
 this idea of options.

0:03:48.760000 --> 0:03:55.060000
 Everything the DHCP server sends to your
 default gateway, your DNS server,

0:03:55.060000 --> 0:04:00.240000
 your, your, whatever, you know, a bootable
 file, all that stuff has a

0:04:00.240000 --> 0:04:02.040000
 specific option code.

0:04:02.040000 --> 0:04:05.740000
 Like off the top of my head, I believe
 option three is the option number

0:04:05.740000 --> 0:04:06.700000
 for the default gateway.

0:04:06.700000 --> 0:04:10.420000
 So the default gateway is contained
 in option three, and then the value

0:04:10.420000 --> 0:04:13.260000
 is the default gateway's
 IP address.

0:04:13.260000 --> 0:04:15.960000
 So your DHCP packet contains
 all sorts of options.

0:04:15.960000 --> 0:04:19.100000
 Now, a lot of these options
 are optional.

0:04:19.100000 --> 0:04:22.240000
 You won't see them in a DHCP packet,
 or, you know, you could choose to

0:04:22.240000 --> 0:04:25.060000
 turn them on in your DHCP server.

0:04:25.060000 --> 0:04:27.660000
 Well, what does that have to
 do with this last command?

0:04:27.660000 --> 0:04:29.680000
 There's one option.

0:04:29.680000 --> 0:04:37.100000
 I'll put down here, which the
 number of it is option 82.

0:04:37.100000 --> 0:04:38.960000
 What does option 82 do?

0:04:38.960000 --> 0:04:43.420000
 Well, the idea is, you know, here's
 your client connected to most likely

0:04:43.420000 --> 0:04:49.800000
 a switch. And then the DHCP server
 is out here somewhere.

0:04:49.800000 --> 0:04:56.120000
 If your objective is, hey, when the client's
 information reaches the server,

0:04:56.120000 --> 0:05:00.640000
 in addition to like the client ID,
 his MAC address, you know, and all

0:05:00.640000 --> 0:05:03.260000
 that other stuff, I also
 want that message.

0:05:03.260000 --> 0:05:06.460000
 Let's say this is the DHCP discover
 that's coming through.

0:05:06.460000 --> 0:05:11.160000
 I also want that message to include
 information about the port on the

0:05:11.160000 --> 0:05:13.460000
 switch that received this.

0:05:13.460000 --> 0:05:18.180000
 What VLAN that port was in, maybe even
 the MAC address of the switch itself

0:05:18.180000 --> 0:05:19.620000
 that it went through.

0:05:19.620000 --> 0:05:24.120000
 You know, if you can find some use for
 that, that's what option 82 does.

0:05:24.120000 --> 0:05:29.920000
 Option 82 inserts into the DHCP packet
 as it's flying through the switch,

0:05:29.920000 --> 0:05:33.780000
 that information about the port, the
 VLAN, and the MAC address of the

0:05:33.780000 --> 0:05:39.020000
 switch itself. Kind of interesting,
 but here's the problem.

0:05:39.020000 --> 0:05:45.220000
 A lot of DHCP server implementations,
 if they receive a DHCP message from

0:05:45.220000 --> 0:05:50.060000
 the client and it has an unrecognized
 option inside of it, they'll just

0:05:50.060000 --> 0:05:51.340000
 discard the whole message.

0:05:51.340000 --> 0:05:54.080000
 It's not like they'll say, oh, I'll
 process the rest of this message,

0:05:54.080000 --> 0:05:56.420000
 but that one field right there that
 I don't really understand, I'll just

0:05:56.420000 --> 0:05:57.540000
 ignore that field.

0:05:57.540000 --> 0:05:59.460000
 No, they ignore the whole thing.

0:05:59.460000 --> 0:06:03.960000
 And unfortunately, a lot of DHCP server
 implementations don't understand

0:06:03.960000 --> 0:06:09.340000
 option 82. And so you'll never get your
 DHCP address because you're sending

0:06:09.340000 --> 0:06:10.900000
 them an option that they
 don't understand.

0:06:10.900000 --> 0:06:12.600000
 You say, wait a second, I
 didn't put that in there.

0:06:12.600000 --> 0:06:17.760000
 No, you didn't. But the moment you enabled
 DHCP snooping on the switch,

0:06:17.760000 --> 0:06:21.180000
 guess what? He puts it
 in there by default.

0:06:21.180000 --> 0:06:24.860000
 Now, don't ask me why Cisco decided
 to make this the default behavior

0:06:24.860000 --> 0:06:26.600000
 of DHCP snooping.

0:06:26.600000 --> 0:06:30.800000
 I have no idea. But essentially, when
 you enable DHCP snooping on a VLAN,

0:06:30.800000 --> 0:06:35.320000
 without you doing anything, it adds
 option 82 into the packets from the

0:06:35.320000 --> 0:06:37.740000
 clients as they're going
 to the servers.

0:06:37.740000 --> 0:06:42.440000
 And this is a bad thing because most
 servers don't recognize option 82.

0:06:42.440000 --> 0:06:44.440000
 Here's another reason
 why it's a bad thing.

0:06:44.440000 --> 0:06:48.740000
 In a lab environment, like the lab tasks
 we've developed for this particular

0:06:48.740000 --> 0:06:54.580000
 set of videos right here, our DHCP server
 is actually going to be a router.

0:06:54.580000 --> 0:06:56.440000
 We're going to have
 a Cisco router.

0:06:56.440000 --> 0:07:01.280000
 Cisco routers, Cisco switches, when
 you configure them as a DHCP server,

0:07:01.280000 --> 0:07:04.780000
 they also don't recognize
 option 82.

0:07:04.780000 --> 0:07:07.800000
 So you can be sitting and scratching
 your head saying, what's going on?

0:07:07.800000 --> 0:07:12.980000
 I've configured my client to
 obtain an address via DHCP.

0:07:12.980000 --> 0:07:17.480000
 I've configured my DHCP pool over here
 and router three or whatever router

0:07:17.480000 --> 0:07:19.700000
 that's it's all well and good.

0:07:19.700000 --> 0:07:23.660000
 But the client is just not getting,
 and I've configured DHCP snooping

0:07:23.660000 --> 0:07:25.800000
 correctly on my switch.

0:07:25.800000 --> 0:07:27.240000
 But my client's not
 getting anything.

0:07:27.240000 --> 0:07:28.000000
 What's going on?

0:07:28.000000 --> 0:07:31.480000
 Well, the problem is that switch
 is inserting option 82.

0:07:31.480000 --> 0:07:36.420000
 And the moment it gets to your router,
 which is acting as a DHCP server,

0:07:36.420000 --> 0:07:39.540000
 he's discarding it because he doesn't
 know what option 82 is.

0:07:39.540000 --> 0:07:43.880000
 So the moral of the story is, you should
 just remember that when enabling

0:07:43.880000 --> 0:07:47.060000
 DHCP snooping, you want
 to turn off that option.

0:07:47.060000 --> 0:07:48.380000
 You don't want to do that.

0:07:48.380000 --> 0:07:53.800000
 So that's where you would say, no,
 IPDCP snooping information option.

0:07:53.800000 --> 0:07:56.800000
 That disables it from doing that, which
 quite frankly, I think should

0:07:56.800000 --> 0:07:59.660000
 be the default behavior
 anyway, but it's not.

0:07:59.660000 --> 0:08:01.820000
 So you have to turn that on.

0:08:01.820000 --> 0:08:04.820000
 So be warned of that.

0:08:04.820000 --> 0:08:08.080000
 Okay. So that was just the
 basics of configuring it.

0:08:08.080000 --> 0:08:09.940000
 Pretty simple. How
 do we verify it?

0:08:09.940000 --> 0:08:13.960000
 Well, we can do show IP DHCP snooping,
 and it'll show us which VLANs you

0:08:13.960000 --> 0:08:16.260000
 have configured and
 enabled it for.

0:08:16.260000 --> 0:08:19.840000
 It'll show us what interfaces you configured
 as your trusted interfaces.

0:08:19.840000 --> 0:08:23.760000
 You got to have at least one in there
 leading to a legitimate DHCP server.

0:08:23.760000 --> 0:08:28.620000
 Now let me backspace
 on that for a moment.

0:08:28.620000 --> 0:08:29.840000
 So I just said, you
 got to have one.

0:08:29.840000 --> 0:08:31.720000
 That's not necessarily true.

0:08:31.720000 --> 0:08:34.780000
 There is a circumstance when
 you don't need that.

0:08:34.780000 --> 0:08:38.720000
 And let me just do this.

0:08:38.720000 --> 0:08:47.440000
 So let's say we have your client or
 clients right here connected to the

0:08:47.440000 --> 0:08:53.700000
 switch. And they are connected to
 access ports that are in VLAN too.

0:08:53.700000 --> 0:08:59.940000
 All right. And let's say here's
 your DHCP server over here.

0:08:59.940000 --> 0:09:02.660000
 And he's maybe 77777.

0:09:02.660000 --> 0:09:07.620000
 And you have to go through your corporate
 network to reach him, which

0:09:07.620000 --> 0:09:09.760000
 is connected to this
 port on the switch.

0:09:09.760000 --> 0:09:17.760000
 Now let's say that this port on the
 switch, so we've got port 01, 02,

0:09:17.760000 --> 0:09:21.720000
 and 03. Now let's say
 03 is not in VLAN too.

0:09:21.720000 --> 0:09:24.440000
 You decide you want to put that
 in a completely different VLAN.

0:09:24.440000 --> 0:09:29.000000
 So that maybe is in VLAN 3.

0:09:29.000000 --> 0:09:32.920000
 Maybe here's a router
 right here who's 331.

0:09:32.920000 --> 0:09:36.660000
 And that router is routing
 to you via RIP or EIGRP.

0:09:36.660000 --> 0:09:38.700000
 And he's telling you
 about the 7 network.

0:09:38.700000 --> 0:09:40.680000
 So your switch is doing routing.

0:09:40.680000 --> 0:09:43.140000
 And so you've got here, you say, all
 right, well, here's what I want.

0:09:43.140000 --> 0:09:48.920000
 On my switch, I want to have
 an interface, VLAN 2.

0:09:48.920000 --> 0:09:52.500000
 And that'll be the default gateway
 for all these laptops here.

0:09:52.500000 --> 0:09:56.200000
 So I'll put some IP
 address on there.

0:09:56.200000 --> 0:10:02.660000
 And I'm going to have an interface
 VLAN 3 with an IP address on it.

0:10:02.660000 --> 0:10:12.340000
 And maybe I'll do OSPF or EIGRP or
 maybe even RIP with router 2 right

0:10:12.340000 --> 0:10:16.140000
 here. And that's how router 2 is going
 to learn about the 2 network.

0:10:16.140000 --> 0:10:20.400000
 And that's how router 2 is going to tell
 me about all the other networks.

0:10:20.400000 --> 0:10:23.940000
 All right, so in this environment
 then, how do we get our network?

0:10:23.940000 --> 0:10:26.220000
 Our DHCP client message
 is that server.

0:10:26.220000 --> 0:10:28.340000
 Well, this has nothing to
 do with DHCP snooping.

0:10:28.340000 --> 0:10:30.320000
 This is just a basic
 DHCP question.

0:10:30.320000 --> 0:10:34.440000
 We would need our switch
 to be a DHCP relay agent.

0:10:34.440000 --> 0:10:37.520000
 All right, so we'd have to go to interface
 VLAN 2 and put in our command

0:10:37.520000 --> 0:10:46.540000
 IP helper dash address and then point
 it at the DHCP server like that.

0:10:46.540000 --> 0:10:51.180000
 All right, what does this have
 to do with DHCP snooping?

0:10:51.180000 --> 0:10:59.100000
 When your DHCP packets terminate on a
 layer 3 SVI, he's trusted by default.

0:10:59.100000 --> 0:11:01.280000
 As a matter of fact, you
 can't make him trusted.

0:11:01.280000 --> 0:11:02.880000
 There's no command for that.

0:11:02.880000 --> 0:11:04.820000
 So this would be a scenario.

0:11:04.820000 --> 0:11:09.580000
 And notice I would only have DHCP snooping
 on VLAN 2 here because that's

0:11:09.580000 --> 0:11:11.400000
 where my clients are.

0:11:11.400000 --> 0:11:14.440000
 So I'd say IP, DHCP snooping.

0:11:14.440000 --> 0:11:23.000000
 And then I'd repeat that
 command for VLAN 2.

0:11:23.000000 --> 0:11:30.820000
 Okay, so now by doing that,
 this port is untrusted.

0:11:30.820000 --> 0:11:34.520000
 This port is untrusted.

0:11:34.520000 --> 0:11:42.540000
 And we don't need a trusted interface
 because my layer 3 interface VLAN

0:11:42.540000 --> 0:11:46.860000
 2, my switch virtual interface
 is trusted by default.

0:11:46.860000 --> 0:11:49.500000
 So this would be a situation where you
 don't have to manually configure

0:11:49.500000 --> 0:11:54.200000
 a trusted interface if all your DHCP
 packets have to go through an SVI

0:11:54.200000 --> 0:11:57.420000
 to ultimately reach
 their destination.

0:11:57.420000 --> 0:12:03.460000
 Only if the DHCP server, only if you
 had a port actually in VLAN 2 that

0:12:03.460000 --> 0:12:08.000000
 led to your DHCP server, all right, now
 we would need that to be a trusted

0:12:08.000000 --> 0:12:18.740000
 interface. That would be
 the situation for that.

0:12:18.740000 --> 0:12:21.160000
 All right, so how do
 we monitor all this?

0:12:21.160000 --> 0:12:22.140000
 We already looked at this.

0:12:22.140000 --> 0:12:29.600000
 We looked at this command and notice
 that right here it shows us option

0:12:29.600000 --> 0:12:34.760000
 82 is disabled less because we turned
 it off with that no command, right?

0:12:34.760000 --> 0:12:36.620000
 Otherwise option 82 will
 be enabled by default.

0:12:36.620000 --> 0:12:38.900000
 So you definitely want to
 see it being disabled.

0:12:38.900000 --> 0:12:43.960000
 You definitely want to
 turn that off yourself.

0:12:43.960000 --> 0:12:47.800000
 And then we can look at the DHCP binding
 table with show IP DHCP snooping

0:12:47.800000 --> 0:12:52.560000
 binding and confirm that our switch
 has actually been monitoring these

0:12:52.560000 --> 0:12:57.300000
 DHCP transactions and has built
 the binding database.

0:12:57.300000 --> 0:13:04.180000
 And that concludes this video on configuration
 and monitoring of DHCP

0:13:04.180000 --> 0:13:06.260000
 snooping. Thank you.

