WEBVTT

0:00:03.100000 --> 0:00:08.600000
 Hello and welcome to this video review
 on static NAT for our CCNA Bootcamp.

0:00:08.600000 --> 0:00:12.240000
 These are the topics
 we're going to cover.

0:00:12.240000 --> 0:00:14.260000
 So what is static NAT?

0:00:14.260000 --> 0:00:19.300000
 So static NAT is a static one-to-one
 mapping, meaning we go into our NAT

0:00:19.300000 --> 0:00:24.060000
 router and we statically give it a command
 saying this inside local address

0:00:24.060000 --> 0:00:29.700000
 will always map to this exact
 outside global address.

0:00:29.700000 --> 0:00:31.300000
 So why would we do this?

0:00:31.300000 --> 0:00:33.580000
 Well this is usually deployed
 at the server end.

0:00:33.580000 --> 0:00:38.100000
 It removes the security
 of dynamic NAT.

0:00:38.100000 --> 0:00:39.160000
 Well what do we mean by that?

0:00:39.160000 --> 0:00:49.120000
 Well, if I go into my NAT router and
 I say this private source address

0:00:49.120000 --> 0:00:55.700000
 is always going to map to this
 public source address.

0:00:55.700000 --> 0:01:00.300000
 What that means then is that translation
 is always in the NAT translation

0:01:00.300000 --> 0:01:02.980000
 table. It's always there.

0:01:02.980000 --> 0:01:11.320000
 So that means anybody in the internet
 can always initiate a connection

0:01:11.320000 --> 0:01:19.000000
 to 150.1.1.1 and because that translation
 exists they will always be able

0:01:19.000000 --> 0:01:22.040000
 to reach this inside source.

0:01:22.040000 --> 0:01:31.080000
 Useful when hosts need to initiate
 connections to inside hosts.

0:01:31.080000 --> 0:01:34.520000
 When outside hosts need to initiate
 connections to inside hosts.

0:01:34.520000 --> 0:01:37.140000
 Let me give you an
 example of that.

0:01:37.140000 --> 0:01:43.480000
 Let's say that this is my corporate
 network right here and here's my NAT

0:01:43.480000 --> 0:01:54.760000
 router. And I still only have one public
 network right here but it's a

0:01:54.760000 --> 0:01:56.400000
 fairly large public network.

0:01:56.400000 --> 0:02:04.960000
 Let's say I was given the entire
 class B of 150.1.0.0.16.

0:02:04.960000 --> 0:02:13.560000
 Now my ISP, he's got the first address
 and I put the second address right

0:02:13.560000 --> 0:02:19.820000
 here. But that still gives me
 a lot of other addresses.

0:02:19.820000 --> 0:02:24.840000
 So what I've done is now even though
 that's given me a lot of addresses

0:02:24.840000 --> 0:02:28.980000
 I have a ton of networks inside.

0:02:28.980000 --> 0:02:33.840000
 Let's say I have hundreds of internal
 subnets and so I've decided to use

0:02:33.840000 --> 0:02:36.280000
 private dressing on those
 internal subnets.

0:02:36.280000 --> 0:02:38.440000
 Maybe that's the 10.10 network.

0:02:38.440000 --> 0:02:40.580000
 Maybe that's the 10.4 network.

0:02:40.580000 --> 0:02:42.660000
 Maybe that's the 10.50.

0:02:42.660000 --> 0:02:47.280000
 10.75 and so on and so forth.

0:02:47.280000 --> 0:02:51.140000
 Now on a few of these networks, not
 all of them, but on a few of these

0:02:51.140000 --> 0:02:55.840000
 networks I have some devices like maybe
 some web servers that I want the

0:02:55.840000 --> 0:02:58.300000
 public to reach at
 any point in time.

0:02:58.300000 --> 0:03:01.640000
 So these web servers are not going
 to be initiating connections.

0:03:01.640000 --> 0:03:04.360000
 They're going to be receiving connections
 from the outside world.

0:03:04.360000 --> 0:03:10.260000
 Maybe there's a web server right
 here who is 10.10.1.1.

0:03:10.260000 --> 0:03:16.820000
 Maybe I got another one down
 here who is 10.75.1.1.

0:03:16.820000 --> 0:03:19.880000
 This would be a prime use
 case for static NAT.

0:03:19.880000 --> 0:03:23.380000
 On my NAT router I could say, all right,
 I'm going to create some static

0:03:23.380000 --> 0:03:33.460000
 NAT entries. 10.10.1.1 is always going
 to be mapped to 150.1.0.3 and 10

0:03:33.460000 --> 0:03:44.440000
.75.1.1. He's always going to have
 a static entry to 150.1.0.4.

0:03:44.440000 --> 0:03:48.720000
 So the rest of my internal network
 is hidden, but now, and the outside

0:03:48.720000 --> 0:03:51.120000
 world has no idea I'm using
 private addressing.

0:03:51.120000 --> 0:03:54.100000
 I have to put private addresses on those
 servers because the subnets they

0:03:54.100000 --> 0:03:58.640000
 sit on, the VLANs they sit on, everybody
 on that subnet is using a 10

0:03:58.640000 --> 0:04:00.060000
.something address.

0:04:00.060000 --> 0:04:02.880000
 So I have to give that to my servers
 as well just because of where they're

0:04:02.880000 --> 0:04:07.360000
 located. But now I've created some
 static NAT entries so everybody on

0:04:07.360000 --> 0:04:15.600000
 the outside can reach my at 150.1.0
.3, which is this guy right here, and

0:04:15.600000 --> 0:04:20.800000
 they can reach 150.1.0.4, which
 is this guy right here.

0:04:20.800000 --> 0:04:25.960000
 So that's a prime use case for static
 network address translation.

0:04:25.960000 --> 0:04:31.380000
 So how do we configure this?

0:04:31.380000 --> 0:04:37.120000
 Well, we still have to define interfaces
 as NAT inside and NAT outside.

0:04:37.120000 --> 0:04:40.020000
 We still have to do that.

0:04:40.020000 --> 0:04:44.400000
 And then we just define a global configuration
 command, IP NAT inside

0:04:44.400000 --> 0:04:49.260000
 source static. And we give the private
 address, like in my previous example,

0:04:49.260000 --> 0:04:53.160000
 10.75.1.1 would be our
 private address.

0:04:53.160000 --> 0:04:56.200000
 And our public address would
 be 150.1.whatever.

0:04:56.200000 --> 0:05:00.820000
 So in this particular case here, in
 this example, our private address

0:05:00.820000 --> 0:05:03.660000
 would be 10.1.1.1.

0:05:03.660000 --> 0:05:08.720000
 And our public address
 would be 135.1.1.1.

0:05:08.720000 --> 0:05:14.880000
 And that's how we would configure
 our static NAT.

0:05:14.880000 --> 0:05:18.740000
 And then to verify that it's actually
 working, that we have a static NAT

0:05:18.740000 --> 0:05:26.140000
 entry, we can do show IP NAT translation,
 or get a little bit more detail

0:05:26.140000 --> 0:05:29.280000
 with show IP NAT translation
 verbose.

0:05:29.280000 --> 0:05:32.920000
 So notice that we have a
 translation entry here.

0:05:32.920000 --> 0:05:37.680000
 Here's our inside local, 10.1.1.1.


0:05:37.680000 --> 0:05:42.040000
 Here's what's been translated
 to 135.1.1.1.1.1.1.

0:05:42.040000 --> 0:05:49.240000
 Notice that it says right here that
 this is a static translation has no

0:05:49.240000 --> 0:05:51.040000
 aging, no timeout.

0:05:51.040000 --> 0:05:54.280000
 It will always be there.

0:05:54.280000 --> 0:06:00.940000
 So that is our review of static NAT,
 and how you configure it, and how

