{
    "id": "7e5967d1-8526-41ae-88f1-9360c6e7111f",
    "name": "IPv6 Addressing & Configuration",
    "slug": "ipv6-addressing-configuration",
    "status": "published",
    "lab_type": "pta",
    "is_sample": false,
    "duration_in_seconds": 1800,
    "metadata": {
        "courses": [
            "84511766-3c0b-48c4-bba4-4cca692382bf"
        ],
        "pta_sdn": "242",
        "pta_namespace": "my.ine",
        "learning_paths": [],
        "has_published_parent": true
    },
    "session": null,
    "company": "a491bc32-c056-4946-9169-cc053387bada",
    "created": "2022-07-07T13:32:13.085694Z",
    "modified": "2023-10-03T18:58:48.222808Z",
    "is_beta": false,
    "lab_objectives": [],
    "main_learning_area": "e73fd5a8-2ead-4159-9a25-38b50ad4ab20",
    "learning_areas": [
        {
            "id": "e73fd5a8-2ead-4159-9a25-38b50ad4ab20",
            "name": "Networking",
            "slug": "networking"
        }
    ],
    "categories": [],
    "tags": [],
    "difficulty": null,
    "is_web_access": false,
    "is_lab_experience": false,
    "is_featured": false,
    "cve": null,
    "severity": null,
    "year": null,
    "external_url": "",
    "solution_video": null,
    "explanation_video": null,
    "description": "![description](https://assets.ine.com/content/ptp/Keith/VOD-5333/Lab-3915/diagram.png)\n\n\n***NOTE:*** Please read the following lab guidelines before working on this lab.\n- If any device contains preconfigured login credentials use, **cisco/cisco**\n- If you plan working on more than one Lab Task during the day (all related to the same course), open the first lab environment and keep it open for subsequent labs (unless instructed otherwise) to save yourself excessive bootup time. Simply read the Lab Objectives from subsequent labs and perform them on your first, opened lab environment.",
    "description_html": "<p><img alt=\"description\" src=\"https://assets.ine.com/content/ptp/Keith/VOD-5333/Lab-3915/diagram.png\" /></p>\n<p><strong><em>NOTE:</em></strong> Please read the following lab guidelines before working on this lab.\n- If any device contains preconfigured login credentials use, <strong>cisco/cisco</strong>\n- If you plan working on more than one Lab Task during the day (all related to the same course), open the first lab environment and keep it open for subsequent labs (unless instructed otherwise) to save yourself excessive bootup time. Simply read the Lab Objectives from subsequent labs and perform them on your first, opened lab environment.</p>",
    "tasks": "**Task-1: Initial IPv6 Addressing Design**\n\n\n1. Given the starting IPv6 prefix shown above the chart (see below), you must divide this into IPv6 subnets:\n    - Subnet zero should be used as your first subnet.\n    - Each subnet should utilize a /64 mask.\n    - Loopback interfaces on routers will be configured     with the first available address in each subnet.\n    - Addressing for Gigabit0/0 on R1 and R2 will be     covered in the next section of this lab.\n    - If not already created from a previous lab, Loopback     interfaces will need to be created prior to address     configuration.\n\n***NOTE: Design IPv6 addresses to be sequential starting with Network-A***\n\n\n***Starting Network: 2001:aaaa:bbbb::/48***\n\n|Network|Subnet-ID|Subnet Mask|Router Interface Address|\n|---|---|---|---|\n|A|2001:aaaa:bbbb:xxxx:: |/64 |R1(Lo0): |\n|B| |/64 |R1(Lo1): |\n|C| |/64 |R1(Lo2): |\n|D| |/64 |R1(Lo3): |\n|E| |/64 |R2(Lo0): |\n|F| |/64 |R2(Lo1): |\n|G| |/64 |R2(Lo2): |\n|H| |/64 |R2(Lo3): |\n|I| |/64 |R1(G0/0) & R2(G0/0): ***TBD*** |\n|J| |/64 |R2(Lo4): |\n|K| |/64 |R1(G0/1) & R2(G0/1): Use the first two available host addresses |\n\n**Task-2: IPv6 Router Configuration**\n\n1. Apply the IPv6 addresses that you derived in the previous step to all Loopback interfaces (Gigabit interfaces will be configured in the next step). Create the Loopback interfaces if they don't already exist.\n\n2. Before you apply any IPv6 address to interface Gigabitethernet0/0 on router R1, predict what Link-Local address will be automatically assigned to this interface by using some kind of \"***show***\" command.\n\n3. Apply the IPv6 prefix you derived for ***Subnet-I*** to Gig0/0 of router R1.  Ensure this interface dynamically derives its interface-ID using the modified EUI-64 method. Ensure this interface is administratively enabled.\n\n4. Configure interface Gig0/0 on router R2 to automatically obtain its IPv6 via SLAAC from router R1. Ensure this interface is administratively enabled.\n\n5. Apply the IPv6 addresses from Subnet-K to interfaces Gig0/1 on both R1 and R2.\n\n6. Answer the questions in the following chart by utilizing appropriate \"***show***\" commands on your routers:\n\n|Question|Answer|IOS Command Used|\n|---|---|---|\n|What is the Link-Local address of Loopback0 on R1?|\n|What IPv6 global address was assigned to Gig0/0 of R2?|\n|What IPv6 multicast addresses is R1's Gig0/0 interface listening to?|",
    "tasks_html": "<p><strong>Task-1: Initial IPv6 Addressing Design</strong></p>\n<ol>\n<li>Given the starting IPv6 prefix shown above the chart (see below), you must divide this into IPv6 subnets:<ul>\n<li>Subnet zero should be used as your first subnet.</li>\n<li>Each subnet should utilize a /64 mask.</li>\n<li>Loopback interfaces on routers will be configured     with the first available address in each subnet.</li>\n<li>Addressing for Gigabit0/0 on R1 and R2 will be     covered in the next section of this lab.</li>\n<li>If not already created from a previous lab, Loopback     interfaces will need to be created prior to address     configuration.</li>\n</ul>\n</li>\n</ol>\n<p><strong><em>NOTE: Design IPv6 addresses to be sequential starting with Network-A</em></strong></p>\n<p><strong><em>Starting Network: 2001:aaaa:bbbb::/48</em></strong></p>\n<table>\n<thead>\n<tr>\n<th>Network</th>\n<th>Subnet-ID</th>\n<th>Subnet Mask</th>\n<th>Router Interface Address</th>\n</tr>\n</thead>\n<tbody>\n<tr>\n<td>A</td>\n<td>2001:aaaa:bbbb:xxxx::</td>\n<td>/64</td>\n<td>R1(Lo0):</td>\n</tr>\n<tr>\n<td>B</td>\n<td></td>\n<td>/64</td>\n<td>R1(Lo1):</td>\n</tr>\n<tr>\n<td>C</td>\n<td></td>\n<td>/64</td>\n<td>R1(Lo2):</td>\n</tr>\n<tr>\n<td>D</td>\n<td></td>\n<td>/64</td>\n<td>R1(Lo3):</td>\n</tr>\n<tr>\n<td>E</td>\n<td></td>\n<td>/64</td>\n<td>R2(Lo0):</td>\n</tr>\n<tr>\n<td>F</td>\n<td></td>\n<td>/64</td>\n<td>R2(Lo1):</td>\n</tr>\n<tr>\n<td>G</td>\n<td></td>\n<td>/64</td>\n<td>R2(Lo2):</td>\n</tr>\n<tr>\n<td>H</td>\n<td></td>\n<td>/64</td>\n<td>R2(Lo3):</td>\n</tr>\n<tr>\n<td>I</td>\n<td></td>\n<td>/64</td>\n<td>R1(G0/0) &amp; R2(G0/0): <strong><em>TBD</em></strong></td>\n</tr>\n<tr>\n<td>J</td>\n<td></td>\n<td>/64</td>\n<td>R2(Lo4):</td>\n</tr>\n<tr>\n<td>K</td>\n<td></td>\n<td>/64</td>\n<td>R1(G0/1) &amp; R2(G0/1): Use the first two available host addresses</td>\n</tr>\n</tbody>\n</table>\n<p><strong>Task-2: IPv6 Router Configuration</strong></p>\n<ol>\n<li>\n<p>Apply the IPv6 addresses that you derived in the previous step to all Loopback interfaces (Gigabit interfaces will be configured in the next step). Create the Loopback interfaces if they don't already exist.</p>\n</li>\n<li>\n<p>Before you apply any IPv6 address to interface Gigabitethernet0/0 on router R1, predict what Link-Local address will be automatically assigned to this interface by using some kind of \"<strong><em>show</em></strong>\" command.</p>\n</li>\n<li>\n<p>Apply the IPv6 prefix you derived for <strong><em>Subnet-I</em></strong> to Gig0/0 of router R1.  Ensure this interface dynamically derives its interface-ID using the modified EUI-64 method. Ensure this interface is administratively enabled.</p>\n</li>\n<li>\n<p>Configure interface Gig0/0 on router R2 to automatically obtain its IPv6 via SLAAC from router R1. Ensure this interface is administratively enabled.</p>\n</li>\n<li>\n<p>Apply the IPv6 addresses from Subnet-K to interfaces Gig0/1 on both R1 and R2.</p>\n</li>\n<li>\n<p>Answer the questions in the following chart by utilizing appropriate \"<strong><em>show</em></strong>\" commands on your routers:</p>\n</li>\n</ol>\n<table>\n<thead>\n<tr>\n<th>Question</th>\n<th>Answer</th>\n<th>IOS Command Used</th>\n</tr>\n</thead>\n<tbody>\n<tr>\n<td>What is the Link-Local address of Loopback0 on R1?</td>\n<td></td>\n<td></td>\n</tr>\n<tr>\n<td>What IPv6 global address was assigned to Gig0/0 of R2?</td>\n<td></td>\n<td></td>\n</tr>\n<tr>\n<td>What IPv6 multicast addresses is R1's Gig0/0 interface listening to?</td>\n<td></td>\n<td></td>\n</tr>\n</tbody>\n</table>",
    "published_date": "2022-07-18T16:06:42Z",
    "solutions": "**Solutions:**\n\n***Task-1 Solution***\n\n\n***Starting Network: 2001:aaaa:bbbb::/48***\n\n![description](https://assets.ine.com/content/ptp/Keith/VOD-5333/Lab-3915/ipv6-address-solution.png)\n\n\n***Task-2 Solution***\n\n1. Below are the commands you would have implemented on router R1.  Similar commands would be implemented for R2's Loopback interfaces:\n\n```\nR1(config)#int loopback 0\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:0::1/64\nR1(config-if)#interface loopback 1\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:1::1/64\nR1(config-if)#interface loopback 2\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:2::1/64\nR1(config-if)#interface loopback 3\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:3::1/64\nR1(config-if)#exit\n```\n\n2. Link-local addresses always begin with ***FE80::*** and utilize an EUI-64 interface-ID (unless otherwise configured). In order to predict what the Link-Local interface-ID would be for Gig0/0 on router R1 you needed to determine the MAC address used on this interface. This could have been discovered using the following command:\n\n    <pre><code>\n    R1#show interface gig 0/0\n    GigabitEthernet0/0 is up, line protocol is up\n      Hardware is iGbE, address is <b>02aa.bbfe.ff02</b>     (bia 0c74.0c9f.0000)\n\n    [Output Omitted]\n    </pre></code>\n\n    Notice in the output above that this interface has two MAC addresses.  This is because the burned-in-address (BIA) starting with 0c74 has been manually overridden with the \"***mac 02aa.bbfe.ff02***\" command. It is this manually-assigned MAC address that will be used in the dynamic Link-Local address.\n\n3. See below:\n\n    <pre><code>\n    !\n    interface GigabitEthernet0/0\n     <b>ipv6 address 2001:AAAA:BBBB:8::/64 eui-64</b>\n    end\n    </pre></code>\n\n\n4. In order for R2 to obtain its IPv6 prefix (via SLAAC) from R1, R2 required the following interface command:\n\n    ```\n    R2(config)#interface gigabitEthernet 0/0\n    R2(config-if)#ipv6 address autoconfig\n    R2(config-if)#no shutdown\n    ```\n\n    However, the command above would not have been enough     to meet the objective. R1 needs to be able to transmit     IPv6 Router Advertisements so that R2 can learn of the     IPv6 global prefix. In other words, R1 needs to     recognize that it should function as an IPv6 router     (as opposed to an IPv6 host). This requires that R1 be     configured with the following command:\n\n    ```\n    Router(config)#ipv6 unicast-routing\n    ```\n\n5. See below:\n\n    ```\n    R1(config)#interface gig0/1\n    R1(config-if)#ipv6 address 2001:aaaa:bbbb:a::1/64\n    R1(config-if)#no shut\n    R1(config-if)#end\n    ```\n\n    ```\n    R2(config)#interface gig0/1\n    R2(config-if)#ipv6 address 2001:aaaa:bbbb:a::2/64\n    R2(config-if)#no shut\n    R2(config-if)#end\n    ```\n\n6. Answers to questions are below:\n\n    - Question: What is the Link-Local address of Loopback0 on R1?\n\n    Answer:\n\n    ```\n    R1#show ipv6 interface brief | begin Loopback0\n    Loopback0              [up/up]\n        FE80::AA:BBFF:FEFE:FF02\n    ```\n\n    - Question: What IPv6 global address was assigned to Gig0/0 of R2?\n\n    Answer:\n\n    <pre><code>\n    R2#show ipv6 interface brief                           \n    GigabitEthernet0/0     [up/up]\n        FE80::E54:D1FF:FE30:0\n        <b>2001:AAAA:BBBB:8:E54:D1FF:FE30:0</b>\n    </pre></code>\n\n    ***NOTE***: Your interface-ID may be different considering that your MAC address will be different.\n\n    - Question: What IPv6 multicast addresses is R1's Gig0/0 interface listening to?\n\n    Answer:\n\n    <pre><code>\n    R1#show ipv6 interface gig0/0\n    GigabitEthernet0/0 is up, line protocol is up\n      IPv6 is enabled, link-local address is     FE80::AA:BBFF:FEFE:FF02\n      No Virtual link-local address(es):\n      Global unicast address(es):\n        2001:AAAA:BBBB:8:AA:BBFF:FEFE:FF02, subnet is     2001:AAAA:BBBB:8::/64 [EUI]\n      Joined group address(es):\n        <b>FF02::1</b>\n        <b>FF02::2</b>\n        <b>FF02::1:FFFE:FF02</b>\n    </pre></code>",
    "solutions_html": "<p><strong>Solutions:</strong></p>\n<p><strong><em>Task-1 Solution</em></strong></p>\n<p><strong><em>Starting Network: 2001:aaaa:bbbb::/48</em></strong></p>\n<p><img alt=\"description\" src=\"https://assets.ine.com/content/ptp/Keith/VOD-5333/Lab-3915/ipv6-address-solution.png\" /></p>\n<p><strong><em>Task-2 Solution</em></strong></p>\n<ol>\n<li>Below are the commands you would have implemented on router R1.  Similar commands would be implemented for R2's Loopback interfaces:</li>\n</ol>\n<pre class=\"codehilite\"><code>R1(config)#int loopback 0\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:0::1/64\nR1(config-if)#interface loopback 1\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:1::1/64\nR1(config-if)#interface loopback 2\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:2::1/64\nR1(config-if)#interface loopback 3\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:3::1/64\nR1(config-if)#exit</code></pre>\n\n<ol>\n<li>\n<p>Link-local addresses always begin with <strong><em>FE80::</em></strong> and utilize an EUI-64 interface-ID (unless otherwise configured). In order to predict what the Link-Local interface-ID would be for Gig0/0 on router R1 you needed to determine the MAC address used on this interface. This could have been discovered using the following command:</p>\n<p><pre><code>\nR1#show interface gig 0/0\nGigabitEthernet0/0 is up, line protocol is up\n  Hardware is iGbE, address is <b>02aa.bbfe.ff02</b>     (bia 0c74.0c9f.0000)</p>\n<p>[Output Omitted]\n</pre></code></p>\n<p>Notice in the output above that this interface has two MAC addresses.  This is because the burned-in-address (BIA) starting with 0c74 has been manually overridden with the \"<strong><em>mac 02aa.bbfe.ff02</em></strong>\" command. It is this manually-assigned MAC address that will be used in the dynamic Link-Local address.</p>\n</li>\n<li>\n<p>See below:</p>\n<p><pre><code>\n!\ninterface GigabitEthernet0/0\n <b>ipv6 address 2001:AAAA:BBBB:8::/64 eui-64</b>\nend\n</pre></code></p>\n</li>\n<li>\n<p>In order for R2 to obtain its IPv6 prefix (via SLAAC) from R1, R2 required the following interface command:</p>\n<pre class=\"codehilite\"><code>R2(config)#interface gigabitEthernet 0/0\nR2(config-if)#ipv6 address autoconfig\nR2(config-if)#no shutdown</code></pre>\n\n<p>However, the command above would not have been enough     to meet the objective. R1 needs to be able to transmit     IPv6 Router Advertisements so that R2 can learn of the     IPv6 global prefix. In other words, R1 needs to     recognize that it should function as an IPv6 router     (as opposed to an IPv6 host). This requires that R1 be     configured with the following command:</p>\n<pre class=\"codehilite\"><code>Router(config)#ipv6 unicast-routing</code></pre>\n\n</li>\n<li>\n<p>See below:</p>\n<pre class=\"codehilite\"><code>R1(config)#interface gig0/1\nR1(config-if)#ipv6 address 2001:aaaa:bbbb:a::1/64\nR1(config-if)#no shut\nR1(config-if)#end</code></pre>\n\n<pre class=\"codehilite\"><code>R2(config)#interface gig0/1\nR2(config-if)#ipv6 address 2001:aaaa:bbbb:a::2/64\nR2(config-if)#no shut\nR2(config-if)#end</code></pre>\n\n</li>\n<li>\n<p>Answers to questions are below:</p>\n<ul>\n<li>Question: What is the Link-Local address of Loopback0 on R1?</li>\n</ul>\n<p>Answer:</p>\n<pre class=\"codehilite\"><code>R1#show ipv6 interface brief | begin Loopback0\nLoopback0              [up/up]\n    FE80::AA:BBFF:FEFE:FF02</code></pre>\n\n<ul>\n<li>Question: What IPv6 global address was assigned to Gig0/0 of R2?</li>\n</ul>\n<p>Answer:</p>\n<p><pre><code>\nR2#show ipv6 interface brief                         <br />\nGigabitEthernet0/0     [up/up]\n    FE80::E54:D1FF:FE30:0\n    <b>2001:AAAA:BBBB:8:E54:D1FF:FE30:0</b>\n</pre></code></p>\n<p><strong><em>NOTE</em></strong>: Your interface-ID may be different considering that your MAC address will be different.</p>\n<ul>\n<li>Question: What IPv6 multicast addresses is R1's Gig0/0 interface listening to?</li>\n</ul>\n<p>Answer:</p>\n<p><pre><code>\nR1#show ipv6 interface gig0/0\nGigabitEthernet0/0 is up, line protocol is up\n  IPv6 is enabled, link-local address is     FE80::AA:BBFF:FEFE:FF02\n  No Virtual link-local address(es):\n  Global unicast address(es):\n    2001:AAAA:BBBB:8:AA:BBFF:FEFE:FF02, subnet is     2001:AAAA:BBBB:8::/64 [EUI]\n  Joined group address(es):\n    <b>FF02::1</b>\n    <b>FF02::2</b>\n    <b>FF02::1:FFFE:FF02</b>\n</pre></code></p>\n</li>\n</ol>",
    "flags": [],
    "min_points_to_pass": null,
    "access_type": "default",
    "user_status": "unstarted",
    "user_lab_status": null,
    "user_status_modified": null,
    "user_flags": [],
    "global_running_session": null
}